Honeywell 3211 Valve Body 3-Way Water Mix 2" Screwed 46.8Cv Stem up Open B to AB 240MOPD.

V5013N-1097 HONEYWELL 2^ THREADED 3-WAY VALVE

The V5013N-1097 Nickel Plated Brass, 1/4" Nominal x 3/8" NPT HONEYWELL 2^ THREADED 3-WAY VALVE is designed to handle steam with a temperature rating of 212 degF (100 degC) at a pressure rating of 150 psi (10 bar). It has a nominal size compression fitting connection of 3/8" NPT that will seal off water to a maximum pressure of 150 psi.

The Honeywell V5013N-1097 3-Way Valve is a 2" 3-way valve that provides protection to prevent your equipment from back flow. This mechanical valve has the rating of 240MOPD, 1.5GPM, 32 PSI, and 2" pipe size. It also comes with a threaded stem up open B connection for a quick and easy installation.

The HONEYWELL 3211 is a 2^ THREADED 3-WAY VALVE. It has a maximum flow rate of 46.8 MOP with a stem up, a closed center, and an open belly A to B, CW handle.

The Honeywell 3211 is a three-way valve designed for threaded connections. The 3211 has side ports and an open bottom for directional flow. This valve has a maximum pressure rating of 300 psi, 25% short-time rating of 350 psi.

The Honeywell 3211 is a 3-way valve for cold water, with a 1/2" male NPT connection. This valve is made of noncorroding, hardwearing nylon and is 2-way nonreturn. The stem is absolutely the best in the business; it's screwed for positive shutoff and has patented vibration resistance. The union nut has a hex cavity for easy wrenching and has a drilled pilot hole.

Installers in the oil and gas industry may need to install 3-way valves that open upwards and sideways. With the Rota-Nex valve they can install it in a variety of positions including upright or nearly horizontal. This valve has 2 outlets and is used for water connections only, providing stopping of water flow without loss of system pressure. It contains 2" threaded ports with an outlet pattern of Y out two outlets. The valve is completely enclosed to prevent tampering.

The 3-way solenoid valve with vandal resistant stainless steel bonnet is available with 1/4 , 3/8 or 1/2 NPT male inlet, female outlet and straight through ports. The diaphragm is designed to withstand superior pressure variations and remain functional. The valve incorporates a one piece bonnet and yoke for superior holding power, quick coupling connections for easy installation and trouble free O-ring seals.