Honeywell 3268 , Inc. 1/2 inch Two-Position Normally Open Zone Valve, Sweat, 3.5 Cv.

24V ZONE VALVE 1/2" SWEAT, 2-POS, N

This Zone Valve from Honeywell is a 1/2 inch two-position normally open zone valve composed of brass, has a connection size of 1/2" SWEAT, and has a maximum flow rate of 3.5 cv at 25 psi. The zone valve is used to supply hot and cold water in heating systems.

The Honeywell 3268 Zone Valve is designed to be used with Honeywell's 24V Direct Expansion (DX) vaporizers. Additionally, it can be used with many other brands of vaporizers using 24v power supplies. It features a manual override and two position normally open (N.O.) leadwires. The valve includes a replaceable 1/2 inch steam seal diaphragm and comes with a set of 1/2" NPT x N.P.T. male pipe adapter unions for easy installation.

More Features Than Any Other Valve On The Market! Two-position normally open/closure valve. Can be field configured as normally open or normally closed and BOTH positions can be used to seal the zone! Manual lever position override allows for test, drain or loop back applications. Only bolt in zone valve on market without removal of threaded boss! Dual bonnet sealing - Eliminates failed seal caused by continuous exposure to water and steam. Consumes less than half the power of alternate products. When sequential turns are requested. Valve responds with two (2) turns: one (1) opening turn and one (1) closing turn

The Honeywell Zone Valve model 3268, 1/2" zone valve is a normally open two position zone valve designed with a rating of 3.5 Cv, it delivers a maximum flow of 3 GPM and has a service factor of .4

The Honeywell 3268 is a normally open zone valve . It delivers full line pressure to a sprinkler or drip system. The 24 volt valve contains a flow control diaphragm and a manual blow-off feature. Use with 24V proportional control valves.

Zone valves are normally open, two-position, flow control valves used to triac, relay or directly wire to a zone controller. It has 1/2 inch inlet and outlet connections and a handle that turns counterclockwise for on and clockwise to off. Residential Zone Valves use Brass bodies.

The Honeywell ZV2800 Series zone valve is designed for use in a variety of small commercial and industrial applications. This low cost, normally open, two position valve offers the ability to select either Normally Open or normally closed position to shut off water flow. The compact size (3.8" H x 5.5" W x 3.4" D) allows it to fit in tight spaces where larger valves are not an option.