Honeywell 3278 , Inc. 1 inch Two-Position Normally Closed Zone Valve, Sweat, 3.5 Cv.

V8043F-1051 1in CXC ZONE VALVE HONEYWELL

The Honeywell V8043F-1051 1in CXC ZONE VALVE is a normally closed switch that replaces multiple normally open zone valves to prevent nuisance tripping and reduce the number of wires: 2.2 Amp; 3.5 CV; contains new seal kit, Teflon tape, wire connectors, and instructions for use. Applications include chilled water air conditioning hydronic heating, and commercial, industry, and scientific instrumentation applications.

This V8043F-1051 1" CXC Zone Valve from Honeywell is designed for use by plumbers in residential water systems and can be used as a zone valve or a diverter. This Honeywell Zone Valve is designed to work in conjunction with the Maxi-Stat 101A Water System Controller, which features the Zoning Wizard that enables you to determine how this valve will operate. Be sure to check sizing on both products before use. The 2" CXC Zone

The Honeywell V8043F-1051 1in is a two-position normally closed thermostatic zone valve controlling water pressure for a single zone application.

The V8043F-1051 Zone Valve is a 1in normally closed zone valve designed specifically for use with 2-wire balanced pressure transducers, thermocouples and programmable controllers. The valve may be installed in the supply without special mounting accessories.

Mounting Configuration: Wall Mounted The V8043F-1051 Honeywell Three Port Zone Valve has a 1" line size and is normally closed in the full-on position.

The 1-inch CXC Zone Valve by Honeywell gives you precise control over water flow to the most difficult areas to reach in your home. The unique two-position tubing and 3/4-inch sweat connections make installation easier than ever before. This valve can be used with 2 ohm electric devices and 10, 15 or 20 amps control. With the traditional 2 position tubing on a 3/4-inch bore, the valve can operate in either normally open (no tubing) or normally

This Honeywell zone valve is designed to be used in air conditioning and refrigeration systems that use a 1 inch CXC fitting. It has an elastomeric face seal that provides resistance against harsh chemicals and compressed air. The valve operates using a two-position normally closed design, where heat will open the valve. The flow of compressed air can be altered by rotating the handle 90°, or it can be completely shut off using the brass lever to lock it in place.