V8043F-1101 CXC 1IN HONEYWELL ZONE VALVE 24V
Open Loop: V8043F-1101 CXC 1IN HONEYWELL ZONE VALVE 24V ? ?? ?? ?? ?? ?Descriptions : ---Product Type: Zone Valve --Flow Rate - Max: 8 Cv --Connection Size(NPT): 1 In --Control Connection: N/A --Expansion Tank Connection: N/A --Solenoid Port Connector: No --Technical Information: Max. Lead Length (Ft.):
V8043F-1101 CXC 1IN HONEYWELL ZONE VALVE 24V 3280 Series 2-Position Normally Closed Zone Valves provide economical and dependable protection against the unwanted water inlet flow to the heating system. By default, the valve will not allow water into the hydronic system until a high water temperature is sensed. When using a 3280 Series circuit on a job site, it is recommended that the middle temperature lead (which can also be used as
The V8043F-1101 is a 1 inch two-position Normally Closed Zone Valve. It has an 8 carbon steel valve body with AISIs 1045 and PH13 castings, stainless steel springs, and a 24Vdc control coil. This valve provides sanitation for a variety of applications in the residential market including kenmore dishwashers, as well as commercial markets such as restaurants. The V8043F-1101 is CSA certified to comply with the requirements of
Honeywell 3280 Series 1 inch Two-Position Normally Closed Zone Valves are ideal for 3/8 or 1/2 inch flexible tubing. All ZV8043F valves come in a hardwired configuration; providing you with one isolated 4-20mA output/0-5VDC or 24Vdc absolute pilot signal per valve, to allow for direct connection to a building automation control system (BACS).
The Honeywell 3280 valve in 1 inch NPT size is a normally closed zone valve. 2 Position 1 In Sweat 24V
Get more from your ventilation system with Honeywell Zone Valves. Our electronic control technology gives you easy, precise zone control over 3280 Series Zone Valves for optimal comfort and energy efficiency. The latest generations of these valves feature more precise control using multi-stage, proportional balancing to help ensure high levels of performance year after year. These 2-way normally closed valves are designed for use with furnaces or air handlers, both hot water and electric, to provide bath added airflow at 1-inch in
With a clean compact design, this Honeywell Zone Valve is ideal for less demanding industrial applications. It features a 1" brass body with an adjustable float that will fit 1-1/2" NPS pipe, but can also be installed in 2" NPS if desired. It has a 2 wire connection, and comes in manual or CP operation.
Free Shipping
In stock
