Johnson Controls 9760 VA-7153-1001 INC.CTRL W/ POS. FEEDBACK 90LB

ELEC VALVE ACTUATOR 90 LB; 2K OHN FEEDBACK

The Johnson Controls 9760 is a VA-7153-1001 INC.CTRL W/ POS. FEEDBACK 90LB that has a 2K OHN feed back.

The Johnson Controls 9760 valve actuator with 90 lb. capacity and 2,000 ohm feedback is designed to control the flow of liquid or gas in applications with minimal restrictions. The housing is formed with a single piece of steel and is both leak and corrosion resistant and features a zoned base and bearing assembly for control with minimal input power. A square microswitch indicator light shows that the control is in operation.

A Johnson Controls 9760 VA-7153-1001 INC.CTRL W/ POS. FEEDBACK 90LB

This VA-7153-1001 INC. controller is designed to control a Johnson Controls Inc. 9760 proportional valve actuator. The feedback loop configuration for this product requires a 90 lb feedback load some use as flow sensors as opposed to weight as the closed loop control. This controller will deliver up to 90 lbs of force on an output shaft . The mounting bracket on this unit has been packaged with the product and there is no need to remove it from another unit to use with your controller.

The Johnson Controls 9760 Series is a two-wire valve actuator with a direct, proportional feedback from the valve position. The Johnson Controls 9760 Series is intended for use with high-flow pneumatic or electronic common medium valves. It may be used in either normally open or normally closed valve applications. This actuator is capable of driving most commercially available valves up to 90 lb line pressure, and most automobile service valves. A miniature solid state feedback device within the Johnson Controls 9760 provides a linear relationship between output and input.

The Johnson Controls Inc.CTRL W/ POS.FEEDBACK 90LB is a powerful and powerful 2-stage Hot Rod, which is making it easy for the user to handle the increasing applications that they may be facing in today's market. It can do all of this plus much more. This product is currently available and in stock and ready to be shipped.

The Johnson Controls 9760 electro valve actuator is directly field adjustable. The 2 kW power requirement is available at 92 VAC (110 VAC at 47/63 Hz) @ 15 amps. The spirit level and the optional DC power work with the fully interchangeable 24-V and Vacuum Connector with Intrinsically Safe snap-in parts kits we provide.

The 9760 Two-Stage Linear Actuator (incorporates feedback) is the complete actuation solution, combining Johnson Controls' market leading Digital Proportional (DP), Analog Proportional (AP) and Absolute Position (APL) technologies, with our patented POS. Feedback Technology, which results in a true "break free" feel. The 7153-1001 INC. CTRL W/POS. FEEDBACK 90LB model comes with an adaptive floor mounting bracket for use with VORTEC® ESD systems.

With a single control, easy-to-use controls and audible feedback, this electric valve actuator is designed for applications where a pneumatic cylinder isn't feasible. The control uses a graphic indicator light to help you easily see your position and activate your valves. The durable, all-metal construction has an IP68 ingress protection rating for harsh environments.

The Johnson Control 9760VA715310012ECC is a DC-Drives/AC Drive Control Line Module Control and Power Feed Back. This JPEC Module is used for Control of the Temperature and Level Control of Combustible Media. This particular model can be used with 3 Phase Power, and has a Feed Back of 90 LB

The Contactor 9760 is a miniature Inc. control for use as a pressure control, flow control or vacuum switch. The positive-acting actuator controls flow or pressure by means of its diaphragm, which moves against the force of the spring to control flow levels. The positive feedback signal is given by means of a bimetal disc which opens and closes the electric circuit as the stem and diaphragm move into and out of their normal working range.

FEATURES/BENEFITS