JOHNSON CONTROLS VA-7200-1001 VA-7200-1001 VALVE ACTUATOR - ELECTRIC; 180LB FORCE

VALVE ACTUATOR - ELECTRIC; 180LB FORCE

VA-7200-1001 VALVE ACTUATOR - ELECTRIC; 180LB FORCE $32.70

The Johnson Controls VA-7200-1001 valv actuator is for use on electric center hung type valves. The valve actuator has a 180 lb. force and a 1/2\" bore. This Johnson Controls product is designed to fit numerous applications and can be used to replace many similar original equipment manufacturers products that have been discontinued or are no longer available.

The VA-7200-1001 Valve Actuator is a direct replacement for existing 7200 Series actuators. The VA-7200-1001 Valve Actuator has a 180lb force and a removable handle that allows for easy wiring harness installation. This metal label valve actuator maintains position when power is off, as well as angle reset.

Get control of your valve actuator with the VA-7200-1001. This valve actuator has a force rating of 180 lbs. It will work on most types of valves, but is best suited for valves that are connected to pumps or other flow devices. The maximum current it can handle is 24 VDC. To complete the job, Johnson Controls also offers an auxiliary kit to accompany this actuator.

This Valve Actuator from Johnson Controls gives you the power to open and close valves in the home. It has a maximum force of 180 lbs, and its length can be adjusted to fit unique needs. The load is offset in a nose down direction to allow gravity to assist in the closing of a valve or door.

The Johnson Controls Valves Actuator Series VA7200 is a direct acting, ruggedized and compact actuator that provides operator convenience and reliable performance with minimal maintenance. The VA7200 utilizes either Solenoid, Battery, Latching Relay or Hall Effect operating inputs to drive its bistable output. When the input signal is removed the actuator will spring back to its original position and resume normal operation.

For valves designed for water cold storage and food cold storage. For use with solenoid operated valves only Product Type: Valve Actuator, Temperature: -20 to 180 Degree F [-28 to 82 Degree C], Voltage: 0.

SERIES VALVE ACTUATOR

The VA-7200 contains an integrated electronic positioner that senses position, velocity, and power loss through the feedback of position/velocity devices. This item has multiple electrical connection types molded into the valve.

The operational control of a fuel pump is critical to the operation and safety of a premise. The VA-7200-1001 is a pneumatic valve drive, operator and arming switch all in one integrated package. It provides maximum control for minimum cost to the customer.

The Valves have been designed to achieve maximum operating efficiency while providing long usable service. They can be used in a wide variety of applications from low-pressure pharmaceutical and food processing applications, to high level disinfection and boiler firing firing systems.

Our patented Stack-N-Lok series creates up to 16% more storage space than the previous design. Stack-N-Lok units can be stacked together in virtually limitless configurations to keep your inventory properly organized. The great variety of sizes and shapes in this system make it adaptable for almost any environment or application. Paper, plastic, hardware or even live fish processors use the Stack-N-Lok system.