Johnson Controls 287775 Actuator, Prop, On/Off Control, or Floating

24v 0-10vdc NSR actuator

Johnson Controls #CIR-24V103BK digital programmable actuator is used for 24v 0-10vdc actuation applications.

Special 24VDC NSR Actuator, AC or DC Voltage Operation, 10-30V DC Supply Voltage Range, 0-10V DC Control Voltage Range, Zero Gate Drive Current to Disable Output, Easy Mounting to Panel or Faceplate with Four Screws to UL Standard 437, Overall Dimensions: 2.43" Width x 2.4" Depth x 1.22" Height.

The Johnson Controls 287775 Actuator, Prop, On/Off Control, or Floating Switch is a 24v actuator, with a linear output. It's an NSR actuator, which means it can be used to toggle on/off an LED array for daylight harvesting applications.

This versatile actuator can be used as a field mounting positioner, a 0-10vdc actuator, a normally-on or normally-off control, or a float switch to detect water level. The precision machined brass housing with captive injection molded pins offers years of reliable service.

Our line of 24 volt dc power sensor/actuator/controls meets the needs of virtually every HVACR application. This product features an ON and OFF control and a 20-foot wires terminated in a plug and play connector for easy system integration.

A actuator, or control, converts an electrical input to mechanical motion. This is the simplest form of actuator. There are 3 primary applications for NSR (normally-staggered) actuators: Valve control, Tact switch/mouse buttons, and Tilt switches - to name a few.

The CP24L is a 100% duty cycle electrical actuator. The output shaft provides 0-10 volt dc to either open or close the valve stem, according to control signal. The control signal can be either ON/OFF (prop), or Analog (float). This allows the valve to act like an electronic solenoid that can be used in applications where proportional flow control is needed.

The PAC-1152 is a 2-wire output that controls the back screen position. When control voltage is applied, the screen moves forward or rearward based on the polarity of the voltage. The PAC-1152 is activated by either 24v AC or 24v DC power which allows for multiple ways of wiring.

This Johnson Controls Actuator, Prop, On/Off Control, or Floating is designed to replace any Prop, On-Off control system. It also includes the mounting hardware needed to handle all of your automation project needs.

The Johnson Controls 287775 Actuator, Prop, On/Off Control, or Floating Adjustable 501-0021 is ideal for use in HVAC systems to control the on/off status of equipment.

This part is designed for use with air-cooled coils.