
Valcom
Valcom VP-412A Power Supply -Receptacle Mount- 12vdc 400mA for FM Tuner.
RECEPTACLE MOUNT-12vdc 400mA FOR FM TUNER
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New AccountPower Supply 24VDC 10 W
The VP-324D is a 24 VDC 10W AC/DC power supply designed for use with Valcom control systems. This power supply mounts in an electrical junction box and offers adjustable voltage via front panel potentiometer.
The 300 mA VP-324 is a single channel, 24 VDC, Receptacle mount power supply designed to be connected to analog/digital type sensors through their auxiliary terminals (RTS and GND). The power supply will work with most standard 24VDC networked sensors.
Receptacle Mount - 24VDC 300mA Digital Power Supply. The power supply comes with a receptacle mounting kit, three wires for input, and one wire for output and required AC wall plug.
The VP-324D is a 24VDC 300mA power supply designed specifically for use with Valcom's TFM-323D and TFM-3360S Table Top Signaling devices. The VP-324D is also compatible with Motorola's FLEXR Series Signaling Devices.
The VP-324D provides 24VDC supply at 300 mA of output current. The device is designed for mounting in standard electrical box or surface mount applications. The VP-324D incorporates a level indication circuit to alert the user to a possible installation problem if the unit is not seated properly in the outlet box.
The Valcom VP-324D Receptacle Mount -24vdc 300ma Digital Power Supply can be mounted in any 24VDC receptacle and provides a regulated output of +5VDC at 300 milliamps.
With a stylish and compact design the Digital Power Supply from Valcom is perfect where space is limited. This high efficiency PWM switching power supply provides 300mA output at 24V DC. The 3 line LCD display features set points of 10% in increments of 1%. An adjustable offset allows up to ±10% of the DC supply voltage to be referenced to a separate signal. A backlit keypad makes it easy to use in dimly lit areas, and with an external ON/OFF switch for control loop isolation.