HONEYWELL VC7934ZZ11 VC7934ZZ11 24V 0-10VDC 3-WIRE MODULATING ACTUA

24V 0-10VDC 3-WIRE MODULATING ACTUA

HONEYWELL VC7934ZZ11 VC7934ZZ11 24V 0-10VDC 3-WIRE MODULATING ACTUA

The HONEYWELL VC7934ZZ11 VC7934ZZ11 24V 0-10VDC 3-WIRE MODULATING ACTUATORS from Larson Electronics is designed to work as a load control to limit power to fixed lighting, and other devices and equipment. This unit requires a 28 Volt DC power source but must be operated in a high resistance circuit. The proper current range for the HONEYWELL VC7934ZZ11 VC7934ZZ11 is 10 Amps

This 24V 0-10 VDC 3 wire Modulating Actuator is housed in a NEMA 4 enclosure designed for outdoor use. It has an integral limit switch and can be used with our VC7934 Series Valve Controllers or can be used as a stand-alone control.

The VC7934ZZ11 is a 3-wire modulating actuator that provides variable air volume. It provides user selectable control within the 0-10VDC range. The wide sensing area and high resistance output provide superior linear output throughout its operating range. The VC7934ZZ11 can be used in either an external or internal application.

The VC7934ZZ11 is a 3-wire modulating indoor/outdoor unit with a 2.75-inch maximum discharge. The outdoor unit is complete with control board, 24VDC motor, housings, terminal strip, sash seal and aluminum top grille. The dimmer function controls fan RPMs and compressor torque when the actuator is on the off position.

The Honeywell VC7934 Modulating Actuator supplies a wide range of functions including:

MODULATING ACTUATORS FOR WINDOW DRIVES ! Features - Stainless steel lock nut - Adjustable hold-off time from 0.1 to 9.9 minutes (0.1 min in increments as small as 1 sec) - Works with the M-Drive ! Listed by Underwriters Laboratories, Inc. as a Safety Switch for use in Motor Control Centers (Gen/Rack) within commercial air conditioning and refrigeration systems ** Use this to operate a plate heat exchanger