Veris Industries H-908 2.5/135A Adj. Current Sw W/Rly 2.5/135A Adj. Current Sw W/Rly

2.5/135A Adj. Current Sw W/Rly

2.5/135A Adj. Current Sw W/Rly, Veris Industries, Current Transformer with Relay

Veris Industries H-908 2.5/135A Adj. Current Sw W/Rly 2.5/135A Adj. Current Sw W/Rly The Bridgeport Series include the H-908, H-909 and H-910 are fully featured, 1 phase dedicated DC power supplies. They are available in a wide range of models to suit your laboratory’s or testing facility’s power supply requirements.

The Adj. Current Sw W/Rly coils are designed for use as the secondary winding of step down transformers in voltage doubler and current doubler circuits. The windings are made from Co-extruded high-strength Polyetherimide (PEI) tape in accordance to IEC 60384-4, IEC 61131-2 and IEEE 587.

Veris Industries H-908 2.5/135A Adj. Current Switch W/Rail, Mounting Type Surface, Mounting Location Side Mount Switches With Rail Part Number H-908, Trip Range 2.5A, Lockout Ability Yes, Adjustable Current Limit 2.5 to 135A Product Overview The H-908 is an adjustable current switch designed to protect the load against excessive overcurrent conditions through a mechanically operated switch. This current switch can operate simultaneously with

This is a Veris Industries H-908 2.5/135A Adj. Current Switch W/Rail. It has a rail for mounting and is rated at 2.5 amps/135VAC with a lever for adjusting the current setting. It measures 0.25"H x 6.6"L x 4.7"W and weighs only 0.47 lbs with packaging (4 oz.). This can be used on small power supplies providing you can specify the upper and lower

The 2.5/135A Adjustable Current Switch provides automatic changeover from 2.5A to 135A for paralleling 115VAC or 200VDC output units for use with inverters, generators, and string inverters. The input connections and main circuit breaker are on one side panel (single phase units) and the low voltage secondary connections are on the opposite side panel. --200-270/277 VAC/VDC - 10 Amp --2 Wires - NEMA 12

The H-908 Current Switch with Remote is a compact switch. It is used to select the type of current and start/stop rating of the load. It has a selector knob for selecting between 2.5, 5, and 10 AMPS. A current transformer is built into the unit and may be wired in series to provide a rated rating up to 135 AMPS on single-phase or 120 AMPS per phase on three-phase. It can also be wired in parallel to provide rated