Johnson Controls 283019 1/2" 2W BALL VALVE 1.2CV SS TRIM SPRING OPENPROP

1/2" 2W BALL VALVE 1.2CV; SS TRIM SPRING OPENPROP

The Johnson Controls 283019 1/2" 2W BALL VALVE 1.2CV SS TRIM SPRING OPENPROP is in stock in our warehouse and in subsidiaries in Little Falls, MN.

A wide variety of accessories are available for our 1/2" 2W Ball Valve 1.2CV, SS Trim Spring OpenProp. We have a selection of flanges, screws, wire leads, electrodes, nuts, gaskets and more to get you started. As well as being convenient, it helps reduce inventory because you have everything you need in one place.

This Ball Valve 1.2CV is made for commercial applications. Available in Stainless Steel, this product features 1/2" Male NPT and 1/2" Female NPT. Also available in models such as Ball Valve 1.2CV SS TRIM SPRING OPENPROP - Johnson Controls 283019, Ball Valves 1.2CV, Johnson Controls 283019 and more

Johnson Controls' 1/2" 2W Ball Valve 1.2CV is a single-rotor, non-balanced valve designed for general purpose commercial and residential water supply and domestic and commercial wastewater applications and sold individually without trim or accessories. It has a spool and spool end to end, body and bonnet of cast-brass construction, and trim spring made of stainless steel.

close your valves instantly with the touch of a finger! this 1/2" 2-way ball valve, whole house ball valve by Johnson Controls, is capable of modulating flow between fully open and fully closed. it can also be used to isolate flow between two separate circuits.

Two-way valves have the ball in the top of the valve to control oil flow in both directions. Retaining rings grip ball and spring behind trim ring to hold down spring assembly to body. All valves have a DIN flange. Ball valves have gate to regulate flow or stop flow completely, and quad seal quad stem for positive shut.

OpenFlow PropAerator control valves are designed for use in low to medium flow rate applications. These electronically commutated, solid state, two-wire proportional and position sensing valves require virtually no maintenance and boast an extended service life. With a very small physical size and weight and a standard body diameter of only 1.00 in., the OpenFlow Valve is easy to integrate into existing piping systems.

The Johnson prop valve series are replaceable trim cover products that are designed for use on both residential and commercial gas fired, oil fired, electric power vented, gaseous waste water treatment, food processing and industrial equipment requiring ¼" through 2" valves. These products are designed to simplify test cocks, pressure regulators, two-stage control valves, safety devices and other ancillary equipment installations. Each valve features a ceramic disc seat for wear resistance, excellent temperature stability and good chemical resistance.

This BVP-06 series ball valves uses standard end point shut off. The body is constructed of an forged brass body, bonnet and ball. The valve is Closed position-Flanged end to end.Actuate by lever or arm, Closed position-Flanged end to end.Actuate by lever or arm, Open position-Flange separated for access to supply line

Built for industrial, commercial and residential applications, Johnson Controls is a global supplier of demand-actuated solenoid valves and controls with a focus on the HVAC/R, industrial and commercial service industries. Our products include products such as temperature sensors, temperature controllers, limit controls, proportional valves and more.

The right solutions for millions of buildings. Providing comfort, productivity, efficiency to match your needs.