Johnson Controls 283785 2" 2W BALL VALVE 46.8CV SS TRIM SPRING OPENPROP C

2" 2W BALL VALVE 46.8CV; SS TRIM SPRING OPENPROP C

Johnson Controls C36 2" 2W Ball Valve Air Control for air-cooled split system HVAC units, Trim spring openprop c

The Johnson Controls 283785 2" 2W Ball Valve is a ball valve from the Series BQ with a handwheel to manually operate the valve. This 1/2-inch ball valve comes complete with trim spring openprop C, 1/2-inch oct fitting brass 1/4-turn ball valve, 1/2-inch NPT male pipe to ball connection and ANSI Specification B16.34 octagonal packing 1/2-inch PTFE 1/2-inch NPT female pipe to ball connection.

The 2" 2W Ball Valve 46.8CV (EBVH 086) is a four-way valve that connects to a T, reducing or increasing the flow of water to an equipment group.

Johnson Controls 2" 2W Ball Valve 46.8CV is made of Stainless Steel. Ball valves offer full port isolation for service work and special service applications. Ball valves are commonly used to isolate the inlet or outlet port of a zone in order to shut off flow in that zone or isolate it from the zone downstream. They can also be used for back flow prevent applications when installed per the ICC® C125 standard. For use on circular pipe, tubing, and fittings with nominal ODs of 2 in..

Johnson Controls' new line of 2" 2-Way Ball Valves has been designed for applications requiring tanks, vessels, and piping to be isolated from downstream pressures while still allowing flow in one direction. Two way ball valves are often used where one or more control points are located between the tank or vessel under pressure, and the delivery point of product. This allows upstream isolation of vessels while still allowing flow. Tanks may also require isolation during cyclic changes in pressure typical of pneumatic systems. The typical two way ball valve will only allow flow when the pressure on both sides of the valve is equalized. The new Johnson

Our 2" Ball Valves are suitable for use in various Valve applications such as Regulators, Relief, and Bypass. Other uses include Gas control and Air control. The sturdy construction results in increased life span under maximum pressure (350 psi). Our ball valves offer a long seat and longer plug travel which provides an excellent seal and lower turbulence. Each ball valve is designed for low flow requirements and port sizes from through hole to small O-Ring size. The valves also feature non-rotating stems and stems with straight and angled ends to accommodate centerline mounted valves for vertical or horizontal installations.

Designed to allow you to make slight adjustments to your boat's water level, this ball valve lets you track the exact level of the boat's water at a glance. Featuring a stainless steel shell that resists corrosion thanks to its nickel chromium plating, it has end trim that closes off the center of the valve for security, and is protected by a hardened debris-resistant nylon ball assembly. This Johnson valve also comes with end trim that closes off the center of the valve for security, and is protected by a hardened debris-resistant nylon ball assembly.

Enjoy a perfect shower experience with this ball valve trim kit from Johnson Controls, the number one trusted name in HVACR. This trim kit has a quality tri-clamp on/off actuator and comes fully assembled.

Organize your parts list, get fast answers from our technical staff, discover useful information about the latest products, stay up-to-date on the latest industry news and get special promotions. Sign in or create an account to begin!

Dual Body, High Flow, Low Pressure Application

Log in to see the price

Johnson Controls, Inc. is a $29.3 billion global diversified technology and industrial leader serving customers in more than 150 countries. Our 120,000 employees create intelligent buildings, efficient energy solutions, integrated infrastructure and next-generation transportation systems that work seamlessly together to deliver on the promise of smart cities and communities.