Johnson Controls 283406 1" 2W BALL VALVE 7.4CV SS TRIM SPRING OPENWITH ON

1" 2W BALL VALVE 7.4CV; SS TRIM SPRING OPENWITH ON

If you want to add a reliable and durable ball valve to your water system, then these high quality valves from Johnson Controls are the perfect solution. Fill your storage tanks without any hassle using these 1" 2W Ball Valves, which have a pressure rating of 7.4 Cv and a temperature rating of 151°F. The trims on these ball valves are spring loaded so you can easily mount them...

Engineered to bring you big savings, this Johnson Controls 1" 2W Ball Valve, 7.4CV is crafted to resist corrosion. This ball valve is certified by UL. It will only fit the Johnson Controls 1" solenoid valves.

The Johnson Controls 1" 2W Ball Valve (7.4CV) is suitable for use in heating, ventilating, air conditioning, and refrigeration applications. It has an ANSI body, barrel, bonnet, and gasket materials of brass or bronze; operating temperature range of 33 to 400°F; pressure of either water or oil up to 600 psi; and is designed with bypass, circuit protection, female pipe thread or flexible conduit connections. Measurements are 3.12" L x 2.44" W x .78" H

The D10-SS is the 3/2 ball valve with SE trim spring open. It features tamper resistant caps, can be tank mounted or panel mounted for remote actuation, stainless steel hinge screws, and fast acting stainless steel ball.

Designed for use with various thermoplastic and thermoset tubing and cable applications, this Ball Valve from Johnson Controls is simple to install and use. Made of nickel-plated brass, it comes equipped with a stainless steel trim spring and is able to open or close quickly.

Zurn's MCZ44 Long Ball Valve has a flow rate capacity of 42 gallons per minute. Its size allows it to fit seamlessly anywhere you need a ball valve, including in a water main. The full port design provides increased flow and the TRIMSPRING allows additional air pressure to be applied for large flows or to advance heavy debris from the valve or system.

Extended lifespan through precision, quality and reliability is not a dream, but a reality. Normal valve failure rate is high due to poor design and inferior material. That is why our valve contain¬s¬¬¬¬¬¬¬an inner system with sophisticated spring mechanism to prevent this from happening. This feature increases the life cycle of the valves up to 10 times in comparison with regular valves.

Specifications:

A ball valve (also known as a globe valve or gate valve) is a valve commonly used to control the flow of liquids or gases (or sometimes slurries) mainly but not exclusively water. A type of flow-control valve, it consists of a round disk with a hole through the center. The disk is placed so that the hole lines up with passage through which the liquid or gas should pass. The disk then can be rotated so that the hole is aligned with a port allowing fluid to pass

Nexa Low Voltage Y-Ball Valve (500 Series) is suitable for low pressure applications like irrigation and pool/spa applications. Y shaped valve allows maximum access to water in the piping system, reducing installation time for service or repair. Used in conjunction with an electrical V Valve Controller (sold separately), makes it possible to automate both water flow and temperature control. Controller must be programmed with an NEXA Low Voltage Valve Control Module (sold separately).