Johnson Controls 283459 VG1245CN+943GGA "1"" 2W 11.7Cv 24V PROP S/R N/C "

1" 2W BALL VALVE 11.7CV; SS TRIM SPRING CLOSEDPROP

The VG1245CN+943GGA is a 1" ball valve, 2W, 11.7Cv, 24V PROPELLER SWITCH No CU. The body is made of brass-body/strainer seat design, with SS TRIM SPRING CLOSED-. Wilson Fittings Inc. has been an ISO 9001:2008 certified company since 2000.

From Johnson Controls, a 1" 2W Ball Valve for process-related applications within the HVAC, Refrigeration and Plumbing industries. Such as a furnace or a heat pump, this valve is set with a handle that turns 360 degrees. The single outlet comes in handy for installing a thermostat at the end of a line. It provides 11.7 CV with a maximum temperature of 24 V, and has an adjustment of 0 to 360 degrees. It is made from die cast stainless steel.

The VG00 series 1" solenoid ball valve from Johnson Controls Valves & Controls is a grade 5, CSA certified stainless steel ball valve. This variable ball valve provides ultimate flexibility, with a wide operating pressure range, a flow rate of 11.7 cubic feet per minute and a medium body flow area of 2.01 to 1 inches for maximum flow volume efficiency.

The VG1245CN+943GGA Propane Propane Valve is a gas-filled solenoid valve designed to control 1" BSP propane gas cylinders. The valve is manufactured from, zinc die cast body and disc, nylon NBR seat element, stainless steel temperature compensation assembly and brass bonnet. This valve also features an integrally molded 943GGA stainless steel flow indicator with 1/4" male NPSM BSP threaded connection. The VG1245CN+943GGA Propane Propane Valve is rated for propane service at 75°F (23°C

With our PROPORTIONAL VALVE with an integrated pilot valve, you can also control your pilot burner without complex electronic technology. Using the pilot valve you can start and stop the pilot flame manually - with a finger's touch. This pilot valve fits on all BMS.BALL valves of the VG series. This pilot valve is verifiable for G1/8" connections . It is suitable for both deep and shallow flue systems.

This ball valve has a 1 inlet and outlet, and is made from S/S.

This genuine Johnson Control is a replacement motor from your home's HVAC system. This is a single-speed, 2-wire unit.

A ball valve is a type of valve used to control the flow of a liquid or gas. It works by rotating to block and unblock openings through which fluid can travel. For example, a faucet is a type of ball valve used to control the flow of water to a sink.

Ball valves are used for controlling flow in domestic chilled water systems, providing a quick and safe method of shutting off water to defective equipment or isolation of sections of pipe.

The VG Series is perfect for applications where continuous operation, low noise, low fluid temperatures, and high flow are needed. Designed specifically for refrigeration/air conditioning, refrigerated processes, HVAC, water purification, medical gas, marine, food/beverage, semiconductor clean rooms, chemical rotary vane vacuum pumps and auxiliary controls.

The VG1 is a state of the art, fully biodegradable UV/ozone resistant clear valve protecting end-users from hazardous fluids and contaminants. End-users require a system involving a pH value of neutral or better. Two cross sectional drawings show the construction and internal components of the valve. A scale drawing shows the physical dimensions of the valve.