Johnson Controls 283482 1" 2W BALL VALVE 11.7CV SS TRM NSRVA9104-GGA-2S A

1" 2W BALL VALVE 11.7CV; SS TRM NSRVA9104-GGA-2S A

This ball valve is designed for 1-1/2" through 2" pipe sizes. The ball valve provides smooth turning and reliable performance Twenty percent (20%) lighter than cast iron, this brass body NSRVA9104-GGA-2S A control valve is fitted with a stainless steel handle and the ceramic seats provide for reliable sealing

The 1" 2W Ball Valve 11.7 CV is fully rated for 200 psi MAX, features stainless steel spool assembly with internal spring, gland packing assembly & external polyurethane seal. It has a maximum pressure rating of 200 psi @ 0.25hp draw with a stem material of 316 stainless steel.

The 11.7CV BALL VALVE 1" 2W is a miniature ball valve that allows full flow and throttling capabilities with minimal flow restrictions.

Spend your money on a valve you can trust. The Johnson Controls 1" 2W Ball Valve is a high quality, low cost valve made to last a lifetime with proper use and maintenance. Upstream and downstream pressures may vary. This ball valve is ANSI certified.

The 2W Ball Valve, for gas control with a maximum water pressure of 11.7 psi, is a solid stainless steel valve body telescoping to 1 inch diameter with a stainless steel transition piece. It contains the thermoplastic insert and has a silver top handle. This two-way valve features air relief and an extended handle kit for more mounting options.

Johnson Controls Ball Valves are manufactured with the highest quality materials to ensure long life. This Ball Valve is equipped with an 11.7 CV stem valve and meets SAE J20 for temperature ratings.

Johnson Controls' ´RCN A-RCN PLUS SS TRM´ ball valves are designed to provide consistent, reliable performance for commercial applications.

This ball valve has a 1" nominal, 2 ½" pipe size, two-way design, flow rate of 11.7 cps, and is made of brass. It has a stainless steel body material and a seat/seal material of PEEK. This Valve complies with ANSI B16.34 and ASME B16.34 standards and registered under the Safe Quality Food (SQF) program

This 1 inch water supply ball valve has an ANSI Class 200 rating. The double port, with gate position in the center, allows flow in either direction when in use. An RTJ lead free connection is required with this product.

A 2-way non-substitutable, manually operated ball valve for gas service is used in residential and commercial cisterns, chillers, swimming pool equipment, medical gas supply systems and other applications. This valve stem has no slip sleeve. It has a 1/4"-27 NPT threads. It is air-actuated.

The Johnson Controls F280GPA1 2-Way Solenoid Valve controls flow in heating/cooling systems to balance home comfort with energy savings. This ball valve provides smooth, fail-proof closure in heat pump applications, where it's important to avoid high differential pressures in the refrigerant circuit.

The ZX Series 25 - 110 l/min 4-way valves offer both an inlet and outlet in the same body. When paired, the two inlets or outlets share a common pilot solenoid with pot relief, air balance and an air ratchet control.