Johnson Controls 6714 1" NPT. 2-WAY N.O. STRAIGHT PNEUMATIC VALVE ASSEMB

1" NPT. 2-WAY N.O. STRAIGHT PNEUMATIC VALVE ASSEMB

The 1" NPT. 2-WAY N.O. STRAIGHT PNEUMATIC VALVE ASSEMBLY is ideal for use where applications require flow control to individual devices or systems, but do not require function status indication. The assembly is factory wired with two 1/2"-14 NPT female threaded inlet ports and a 1/2"-14 NPT female outlet port which may be connected to external low pressure air sources.

The Johnson Controls 6714 1" NPT. 2-WAY N.O. STRAIGHT PNEUMATIC VALVE ASSEMBLY is a precision engineered pneumatic control accessory designed for use with Johnson Controls Power and Super Power control heads and also 7700 and 7800 Thermostats, 7701 and 7802 programmable controllers, and the 7750 and 7751 I/O Communications servers. The 4 ports of the 6913 FMI connector allow the users to connect these components plus many others as well as to extend connections from block mounted panelboards throughout a facility.

The Johnson Controls 6714 1" NPT. 2-WAY N. O. Straight Pneumatic Valve Assembly, model # 6714 High Pressure Two-Way Non-Check Valves are suitable for all types of gases and air used in low to high pressure process controls. These Johnson Controls valves are made of alloy steel, fully welded, heavy duty construction, equipped with pneumatically operated plug valves, two position (normally open) and (normally closed) directional actuators;in full port design; stabile handle; easy positioning; excellent mechanical seal; uses 37C wetted parts

This Johnson Controls Model 6714 is a 1" NPT, 2-Way N.O. Straight Pneumatic Valve Assembly with Inspection Cap for use on the HI-PILOT™ Line of Autogas Conversion Kits for Ford® Taurus® and Mercury® Sable® automobiles.

The 6714 is an open-center 2-way straight pneumatic valve with a 1" NPT outlet and inlet. The stem position indicator of this Johnson Controls valve allows for indication of the position of the stem.

The 6714 is a straight, normally closed pneumatic valve with N.O. contacts. It has a 1" BSP inlet and outlet, and has a contacts jaw width of 5.2mm / 0.200". The 6714 is available from stock, rated at 28 volts AC/DC, 300mA resistive load, 45 volts AC/DC, 30mA resistive load.

8-1/8" TO 35-7/8" MODELS HAVE 2 N.O. STRAIGHT PUSHBUTTON SWITCHES. 23-1/8" TO 35-7/8" MODELS HAVE 1 N.O. TRIGGER OPERATED PUSHBUTTON SWITCH (TRIGGER OPERATED SWITCH HAS A SPRING RETURN, DOWN FOR THE VALVE TO CLOSE).

This Johnson Controls 6714 2-way pneumatic valves provide added handling and control of the flow of compressed air. Its compact design fits into tight spaces. This normally closed valve has a spool with external adjustment for precise flow control and ease of alignment during installation. The self-contained, non-dedicated spring system resists shock and vibration, and is maintenance free. It features a zinc epoxy steel body for maximum corrosion resistance under any applications.

Pneumatic 2-way valves are used to control flow between a pneumatic tool and a pneumatic component under pressure. While air flows from the tool through the valve into the component, it stops from flowing from the component back into the tool.

Aerospace quality, solid brass construction of this pneumatic valve from Johnson Controls ensures trouble free operation for many years of service. The valve is compliant with the performance standards for low leakage and high accuracy needed for astronomy applications. Having a straight port configuration, this valve is easier to install than other types. With NPT threads, this element is suitable for industrial process control equipment, scientific instruments and industrial plant equipment.

A direct replacement for the following valves: