Johnson Controls 37696 1" NPT 2-WAY N.O. PNEUMATIC VALVE CV=11.6 W/3000 9

1" NPT 2-WAY N.O. PNEUMATIC VALVE CV=11.6 W/3000 9

This Johnson Controls 37696 1" NPT 2-WAY N.O. PNEUMATIC VALVE CV=11.6 W/3000 9 fits for vessel's air supply requirement, yet, the suitable one is hard to find, also it is easy to use.

The Johnson Controls V1173 is a 1" NPT 2-Way N.O. pneumatic valve CV=11.6 W/3000 PSI for industrial and OEM use.

The 37696, 1" 2-way N.O. Cv=11.6 w/3000 psi, is a 1" Gas & Air Valve, mounts 1" Female Swivel Nut onto 1" Male Pipe Thread, Zero Flow Bore with ball or butterfly valve design, 1" Pneumatic lever handle for 1" hand wheel, Polypro Webbing Handle

This Johnson Controls 1-inch pneumatic valve is designed with a compression spring for optimum performance. It delivers low pressure at 11.6 with 3000 working strokes per minute at 100 psi. The stem is made of stainless steel, and it has a fully adjustable bonnet. Its packing is zinc plated, and it has a seat that is installed with gasket seal to allow free movement of fluids. The valve can withstand high pressure, and is used in many commercial systems, particularly in heating and cooling applications.

The Johnson Controls 2-Way N.O. Pneumatic Valves (Branch Exhaust) are used for exhaust applications with moderate flow requirements. The 2-way valve is designed to exhaust gases out of the workspace.

The 37696 is an 11.75" long 2-way pneumatic valve with spring return for N.O. service. It is designed to only open one way and has a 3000 PSI Matched Actuating Force (MAF).

Start, stop, and control pneumatic actuators with the Johnson Controls 2-way pneumatic valve. This 1" NPT valve is compatible with 1" quick coupling tubing to deliver high pressure air to other pneumatic actuators. Its brass construction ensures durability, while the spring-loaded lever handle makes hard starts easy. This pneumatic valve has a built-in check-valve, allowing it to be isolated without damaging the other valves in the system.

Precise controls and easy installation make Johnson Controls' 2-way pneumatic valves ideal for controlling the flow of gases, liquids and compressed air. These valves also offer high vacuum capability for high-efficiency steam traps. They can be easily adjusted and operated and work with 0 and -700 PSI ratings, depending on style. Together with other Johnson Controls components, these valves help you optimize your project.

The 37696 1" NPT Two-Way Valve with 3000 PSI Valve Pressure is designed for use on systems that require a high flow option.

This Johnson Controls standard, normally closed (NC) valve is designed for use with general purpose air and pneumatic systems. It includes a heavy-duty metal housing, solid ceramic ball and stainless steel seat, as well as a stainless steel spring and Buna-N seals capable of withstanding high temperature and pressures. The single-point unloader unplugs from actuator to facilitate removal for maintenance or replacement. It is suitable for use in cold and heat climates and has an aluminum actuator and cover for better heat dissipation and to protect against corrosion and rusting.

-------SALES CODE 37696-------

Attached to a float and a pilot, this pilot-operated, spring-balance pressure relief valve (PRV) provides flow and pressure control for air and noncondensing gases, such as nitrogen and helium. This pilot-operated PRV is designed to provide flow and pressure control within the operating limits for air and noncondensing gases such as helium. It also features manual adjustment of the pilot discharge above the pilot's set point using a hand wheel or lever handle located on top of the pilot case.