Johnson Controls 39458 VG7443LT+3008B NC3/4 NPT 6.3 W/3000 3-6#

NC3/4 NPT 6.3 W/3000 3-6#

JCI (Johnson Controls) 39458 VG7443LT+3008B NC3/4 NPT 6.3 W/3000 3-6#…

The Johnson Controls 39458 VG7443LT+3008B 1/2 NPT 6.3 W/3000 3-6# Pneumatic, General Purpose Valve with 300psi Relief is a pneumatic solenoid valve used for barrier gas packages. It is capable of delivering high flows of air up to 6.3 scfm (21 m³/min.) in normally closed (NC) or normally open (NO) operating modes. This ball valve is designed for use in general purpose applications. It has standard 1/2 NC female pipe thread connections and an actuation force of 6 to

The reliable Johnson Controls VG743/LT+ 3008B regulator is ideal for moderate pressure and volume. The Johnson Controls 39458 regulator has 100% stainless steel wetted parts, plus a 400 psi rated spring and 200 psi rated diaphragm.

16 amp 240 volt Rheem water heater with instantaneous gas overheat shutdown, Self diagnostics with test button, Gas & Oil valves with pump-up pilot control

The VG7443LT+3008B valve has the features needed to handle the pressures of both boiler water and domestic water while reducing maximum flow temperature by up to 40 degrees.

The Johnson Contoversy 2100 Indoor/Outdoor Thermostat is a programmable, multi-stage electronic room thermostat with a sleek design and a clear display for day or night viewing. This thermostat comes from the HVAC Controller series by Johnson Controls and is part of their VG7000 family.

The Johnson Controls 39458 VG7443 LT+3008B Series 1 Indoor Hydronic Unit is capable of providing 3.0 tons of cooling and heating capacity with a maximum ambient temperature rating of +104°F at 80% relative humidity in the cooling mode. With two separate temperature-regulated zones, this unit can accommodate very large capacity requirements for distributing conditioned air to multiple spaces in large commercial facilities. Power is provided in the form of electric resistance-type heaters in both heating and cooling modes.

Johnson Controls 39458 VG7443LT+3008B is a sealed low temperature refrigerant circuit board heater. This plug-in heater is configured for heating duties with the main side inlet customer supplied with the equipment. The board features an aluminum base material and stainless steel case.

Developed under the requirements of reverse osmosis membranes requiring very low variation feed water pressure

The VG7443LT-3008 Series is a group of NTC thermistors designed to sense electrical resistance changes in heater elements (resistors) special semiconductors to model the human body in applications requiring body temperature measurements or estimation.

The Digital Thermostat is a Johnson Controls brand. The Thermostat can be used to control a heating system that operates an electric heat exchanger with the use of various types of media, such as water, air, or steam.