Johnson Controls 39476 VG7443NT+3008D "1"" NC 11.6CV SS 4-8#"

NC1 NPT11.6 W/3000 4-8#

75 PSI/1.8GPM HIGH PRESSURE TO 4-8# SPRINKLER WITH NEEDLE VALVE – Maximum system pressure – 75 PSI – NC1 - 1"" NPT – 11.6 KGF , 300 CFM, 2800 PSI Max operating pressure, 150 PSI cutout pressure at sea level. Maximum flow 3.0 GPM at 50 PSI

This is a Hexagonal design with EPDM O-ring and SS side port cover, Double gasket provides positive seal. This valve has an NPT 11.6 Female threaded port with a 300 PSI, 4-8# diaphragm, and a 36"" high vertical globe body.

This Johnson NC1 11.6 .4 to 8# 12V minimum valve is used on outdoor commercial refrigeration and comfort systems and AC systems. It is designed for touchless mounting and installed in SS enclosure 3008D via ra

Use this 1"" NC 11.6CV SS 4-8#" to switch from 1 pump to another, operate a float valve, or as a simple switch.

The VG7443NT+3008D "1" NC 11.6CV SS 4-8#" provides the same comfort and performance as the standard VG7443NT+3008, and adds 1"" NC and 11.6CV service downstream of the 400 psi service valve. This valves design enables it to balance air and water flow to maximize comfort and efficiency regardless of room conditions.

The Johnson Controls 39476 VG7443NT+3008D is designed for applications using natural gas. This 3008C 11.6CV thermostatic gas valve with pilot is the same as the manufacturer's original equipment (OEM) controls and can be used as a replacement for selected equipment manufactured by Trane, American Standard, US Filter and other manufacturers.

Perfect for heating small areas with an output of 3,300 BTUs, this Johnson Controls VG7443NT+3008D 1? NC regulator is designed to meet the needs of your residential or commercial heating needs. Built with a stainless steel construction for enhanced durability, this unit features a lead-free brass valve, high sensitivity thermal overload protector for increased safety, and a corrosion resistant ball.

The VG7443NT+3008D Johnson Controls water heater is a horizontal, natural gas-fired, forced-draft unit with an integrated control valve and isfor industrial and utility applications. The vent frame and draft hood assembly are fixed to the top of the enclosure. The relief valve and pressure relief combination is designed to provide relief through the drain valve (Johnson Controls approved drainage system required).

All-directional valve that handles solenoid valves and direct acting valves. It has a bi-directional spool and adjusts stroke and on/off positions on the two handles for more versatility.

Leading the pack are self-contained cartridge heaters with the superior power, control, reliability and dependability of Johnson Controls. That's why they're trusted by thousands of HVAC professionals to deliver outstanding heating technology.

The VG7443 is a reciprocating vacuum actuator that has been manufactured from the highest grade materials to ensure long operational life, even in a dynamic process environment. The construction incorporates a high quality stainless steel body with a Noryl® ram and a glass-filled nylon housing. High flexibility is achieved without flutter or bounce with this design while also providing excellent sealing performance.

The VERTACO VG is a low-pressure, high-flow centrifugal pump that provides high start-up flow rates even in cold weather. It is recommended for small commercial water transfer applications, including irrigation.