Johnson Controls 55048 1" TWO WAY UNION ANGLE N.O. PNEUMATIC VALVE ASSEMB

1" TWO WAY UNION ANGLE N.O. PNEUMATIC VALVE ASSEMB

The Johnson Controls 55048 1" TWO WAY UNION ANGLE N.O. PNEUMATIC VALVE ASSEMB is the ideal choice for professionals in the heating industry or do-it-yourselfers at home levels who are looking to take on small projects with their specific skill set. With this valve, you can configure it in multiple positions depending to where your installations needs are.

This is a brand new 1" TWO WAY UNION ANGLE N.O. PNEUMATIC VALVE ASSEMBLY, This assembly come complete with proper fittings and has been tested to work properly before shipment, 100% factory tested and ready to use upon arrival

The Johnson Controls 55048 1" TWO WAY UNION ANGLE N.O. PNEUMATIC VALVE ASSEMBLY is the ideal choice any time control, energy management, and cost are considerations.

The 55048 1" TWO WAY UNION ANGLE N.O. PNEUMATIC VALVE ASSEMBLY from Johnson Controls is a valve design suitable for pneumatic control of single phase liquid-to-gas closing and opening control of a liquid collector header for a gas-fired boiler charging a standby liquid storage tank.

DESC The Johnson Controls 55048 1" TWO WAY UNION ANGLE N.O. PNEUMATIC VALVE ASSEMBLY is a two-way air, solenoid-operated valve that directs air flow to either port. This valve has a 1-inch inlet and outlets that are both ¾ inch NPT female. The valve is typically used to cut off the air to devices such as machine tools for jobs where air delivery is needed intermittently. The microswitch trip changes the electrical status of the valve from normally closed (NC) to open or disconnected (common). When the switch

The 55048 1" Two Way Union Angle No Pneumatic Valve Assembly from Johnson Controls is a pneumatic vacuum valve that is used with system components to introduce or exhaust gas from a gas storage system. The valve has one port that allows the connection of a 1/2-inch inside diameter tube and another port that allows connection of a 1/2-inch outside diameter tubing. It has a 22 inch long tube made from 99 percent pure virgin rubber, a minimum purity of 99.97 percent, and a melting point of 248 degrees Fahrenheit. The 55048 includes a ball check type design to prevent back flow.

These Johnson Controls 55048 Two-Way Union Angle N.O. Pneumatic Valves combine the functions of a check valve and a shutoff valve into a single device, in a variety of different possible configurations, that may be either manually or pneumatically controlled.

The Two-Way Unions and Angle Valves, designed for use with:

Industrial two-way manual non-pneumatic angle valve. Adjustable high pressure release port. 3/4" NPT female inlet and outlet. 1 1/2" NPT female relief port. Available for voltages up to 480, 3 phase.

Two-way self-sealing pneumatic valve designed to use air or vacuum force for automatic pressure relief or foreline service applications.

Set at an angle, the two-way valve is used to create an airtight suction. Simply rotate the valve to choose the best placement for the suction. Perfect for applications with limited space.

Offering characteristics of both the control and gauge valves, the 55511 Angle Valve is designed with 2 female pipe threads to use with air supply systems. The 55481 elbow can easily be swiveled to function as a straight or angle valve. When working with air, pressure is reduced due to the reduced cross-sectional area of the tube through which it passes.