Viessmann 7828749 Flow Sensor B1KA / CPK

Flow Sensor B1KA / CPK

The Flow Sensor B1KA / CPK measures the flow rate and the average flow in drainage and gravity water systems with a measuring range of 10...40 l/min. The display can be read directly on the device and is shown in 1 l/s and 100 l/h. The flow sensor is suitable for indoor and outdoor use and is protected against humidity and electromagnetic interference.

The Sensor B1KA / CPK can be used as an integrated flow sensor for electronic controls or as a flow transmitter for external electronics. The latest electronics, four 3/4-digit display, wide range of supply voltage and high accuracy form the basis for all applications.

Plug-in flow sensors record the amount of hot or cold water used for billing purposes without changing the-existing plumbing. The Flow-Sensor B1KA is used for hot water, whereas the QSK5 is used for cold water . The QSK5/B1K sensors are particularly suited for "service-free" installations where they are simply plugged into the existing pipe between the water meter and the heating equipment. With a measuring range of 0.01 to 9.99 liters per minute with a resolution of 0.001

The Flow Sensor CPK is a replacement for your defective flow sensor. A new flow sensor will restore a smooth flow of gas and improve the functionality of the Viessmann boiler. It also comes with a two year warranty, so there's no risk in trying it out!

The sensor B1KA is used to measure the flow rate of natural gas for current metering.

The B1K/C PK allows to connect any source of water and to measure the flow and the amount of water which flows through it. Appropriate operating and safety instructions and warnings must be read and understood before connecting and operating this device. The flow meter is filled with non-draining liquid. Every reading is calculated from the actual amount of liquid, sampled at regular intervals.

The Viessmann CPK flow sensor is used to measure the flow rate in input streams of gases, liquids, slurries etc. It has an adjustable switching frequency between 800 Hz and 400 Hz via optional accessories.

Measure the flow of fluid in pipes and ducts up to DN 200. The indicator measures the flow directly, without an additional calculation or conversion. The CPK-1 is ideal for commercial heating applications with a maximum temperature of 70°C compact and flexible design ideal for use in difficult-to-access, confined spaces no rotating parts nearby

Flexible Mounting Options - The Viessmann Flow Sensor can be mounted both horizontally and vertically.

The flow sensor enables the user to determine the volume flow rate of hot and cold water.

Set the right water temperature for your Viessmann boiler with this flow sensor. It's a quick and easy replacement for the standard sensor, fits easily into the boiler, and outputs the correct water temperature to your system.