VON DUPRIN 95800300 958003-00 QEL 33/35/98/99 Series Retrofit Kit for 3' Panic

VON 958003-00 QEL RETROFIT KIT 3 FT PANIC 33 35 98 99 SER

Von Duprin panic hardware retrofit kits make it easy to upgrade to Von Duprin panic exit devices using Title 24 compliant door hardware on existing IC-rated doors without construction. Each kit includes one actuator, installation tool and hardware for one leaf or two doors. Visit www.vonduprin.com for more information on the VON 958003-00 QEL RETROFIT KIT 3 FT PANIC 33 35 98 99 SER and other Von Duprin products.

The Von Duprin 958003-00 QEL Retrofit Kit for 3 ft. Panic is designed for install on the 33/35/98/99 series panic models. The Retrofit Kit includes an aluminum tube that replaces the original nylon cable.

The VON DUPRIN 958003-00 QEL RETROFIT KIT 33/35/98/99 SERIES is an upgrade kit that is used with a VON DUPRIN 958008-00 or other Direct Connect retrofits.

Retrofit Kit: Push button for 3’ 0” Panic Release (33-35, 98-99 Series) - 958003-00 QELPANIC3 For use with 9570000-00 and 9570000-01 QEL 3’ x 3’ x 18 gauge in floor pull station. For

The Von Duprin 958003-00 Retrofit Kit for 3' Panic Doors. This retrofit kit includes the panic bar hardware to install a 3' panic door on the 33, 33D, 98 or 99 series Von Duprin exit devices.

The Von Duprin 95800300 is a retrofit kit for the 33/35/98/99 Series retrofit.The 95800300 Retrofit Kit can be used to convert the following panic devices over to a pull-down device. The 95800300 is a 3' Panic only and cannot be used on any door that requires a rewrite.

The Von Duprin 958003-00 Retrofit Kit comes complete with a Panic helper and a 20amp time delay relay. Easy to install on all QEL models with 3ft panic. The simple dial allows your customers to time the alarm from 0 to 3 mins or disarm, putting you in control of the alarm function.