PNEUMATIC RADIATOR VALVE 3/4" ANGLEThe Honeywell VP525C1065 Pneumatic Radiator Valve 3/4 Inch Angle is designed to be used with 1/2-inch copper tubing. The valve can handle a pressure range of 25 psi...
PNEUMATIC RADIATOR VALVE 3/4" ANGLE
HONEYWELL 11497 3/4" ANGLE MALE UNION PNEUMATIC INTEGRAL VALVE WITH SPRING. This valve is new but old stock, it has never been used. The valve looks like it has been sitting on a shelf for a little bit of time because this was previously in a box and there are scratches all over the body, but other than that it looks in good condition.
The 11497 3/4" NPT Angle Valve consists of an integral valve with a service port. This pneumatic design reduces installation time and costs. This valve can be used on radiators, charcoal, warmer cabinets and many other HVAC applications. With a non-rising stem design, the valve will stay seated in the closed position even after thousands of switching cycles. An angled body provides clearance for hoses and piping. By incorporating both shanks within the body these valves are not as susceptible to the effects of vibration or shock. By eliminating the need for a separate pneumatic fitting the hose assembly is
The Honeywell 11497 Angle Valve is a 2 port pneumatic radiator valve which attaches to 3/4" copper tubing. It is used with gas or steam heat and is set at a 45° angle to the pipe.
Our Pneumatic Radiator Valve with Spring is installed inside a radiator and comes in varieties of square, round, U- or L-shaped flat wire handles. It can be used with either steel or copper tubing in an installation. Before purchasing this valve, make sure that you know the size of your radiator and what kind of handle shape you need.
This Honeywell Pneumatic Radiator Valve is designed for use in applications with a thermostatic steam valve. It has a small compact housing and offers a clear casement and several options for exhaust. The valve is air-spring operated and provides 50% shut-off. This product is backed by the Honeywell 100% Performance Guarantee.
The Honeywell valve assembly 3/4" angle male is easily installed as a replacement for the factory original. It has 1/8" hexagon female port with an air plumb included to use as hard wired or the ability to clip on an airline fitting (not included). A small spring comes with the valve assembly to provide a tight seal end and eliminate any air leaks.
The Honeywell 11497 3/4" NPT Angle Male Union Pneumatic Integral Valve w/Spring features an adjustable flow control and a pneumatic integral design for increased performance and reliability. The 3/4" male NPT angle valve is for use with pneumatic air lines in heating and cooling systems, motorized equipment, and material handling systems.
"NON-ELEC.OPERATORThis NON-ELOOP operator will mix or dump a 1/2" to 4" supply to a 2" or 4" return. The Actua has a unique on-off lever that is ergonomically designed and self-locates in the ON...
m The Fenwal 35-655205-011 24V NO PP 4sec TFI 3tries 15ipm is a 24 volt, no-pulse, 4-second timer with 15-impulse per minute (ipm) output. It is designed for use with Fenwal power tools and is...
The Falcon B511BDC-DAN-625 Entry Dane 2 3/4 B,S, X 4 7/8 is a heavy-duty, side-hinged door that is perfect for commercial or industrial applications. This door is made of high-quality materials and...
The Sunex SUU-213MD 1/2-Inch Drive 13-mm Deep Impact Socket is a high-quality socket designed for use in a variety of applications. It is made from durable steel and has a precision-machined,...