Cecilware
WATER PUMP - 230V for Cecilware - Part# 310-00007
This is a 230V water pump for Cecilware water heaters.
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New AccountWATER PUMP115V, 3000RPM for Cecilware - Part# 310-00006
When you have a pump failure, the time to repair is now. WATER PUMP115V, 3000RPM for Cecilware - Part# 310-00006 REPLACE CONTROL MODULE for Waring - Part# 026400 can be on your doorstep tomorrow.
Here, you'll find useful product information to help you make an informed decision. Water Pump115V, 3000RPM for Cecilware - Part# 310-00006, CONTROLLER MODULE for Waring - Part# 026400, Water Pump115V, 3000RPM for Cecilware - Part# 310-00006 ...
The WATER PUMP115V, 3000RPM for Cecilware - Part# 310-00006 is a water pump which pumps water from a sink or from a country pond to a garden.
A water pump 115V, 3000RPM for Cecilware - Part# 310-00006 from Grainger can help your machine function normally. This water pump is made from durable materials with a strong plastic housing. It has brass ports and a double rubber impeller with carbon brushes. The bearings are stainless steel and glass filled nylon.
The Cecilware Water Pump, Part # 310-00006 is an industrial pump that has a rotary pump for industrial applications. It does not have an on/off switch and it comes with 115V industrial plug. It has the following dimensions: 6" x 8 1/2" x 9" #310-00006
1200 RPM, 115V. 1-1/4" X 10'. For Cecilware, Waring.
The control module is the brain of the ice machine. It's the electronic device that sends commands to the air conditioner compressor, water pump, and fan motors.
Welcome to RepairClinic.com, your home for Whirlpool, KitchenAid, Maytag, Jenn-Air appliance parts and repair advice. We also carry parts for Bosch, Amana, Frigidaire, GE, Hotpoint, along with many others.
INSTALLATION GUIDE – Remove any grease and dirt from mounting brackets and surfaces, and spray with a light coat of paint. Install the pump module to the lower bracket (A) using four (4) screws (B). Wire pump module to the solenoid plate (C), then place the upper bracket (D) on top of the lower bracket (A).
These replacement water pumps are manufactured exactly to the original specifications. For durability and reliability, they are pre-tested before being packaged so you can be sure your equipment will work properly when the water pump arrives.
Enjoy refreshing, ice-cold water from an attractive under-the-counter refrigerator on a budget.