WEDGER- 6 NEM for Nemco - Part# 55550-6
The Wedger, 6" Nemco - Part# 55550-6 allows customers to serve 6 oz. wedges of cheese, fruit or vegetables. Perfect for restaurants and grocery stores, the Wedger saves time and labor costs by keeping all foods in place during serving.
The Wedger-6 for Nemco produces 6 wedge-shaped cuts in potato products, 6 times faster than a traditional knife. The Wedger-6 from Nemco is the ideal replacement for manual wedgers. It's sturdy construction and cast steel blade will last for years of use.
The Wedger-6 is a small, lightweight, portable wedge that easily attaches to the end of most Nemco Easy Chopper Food Choppers. This economical tool makes it easy to set up a perfectly straight edge for cutting or portioning your product. The Wedger-6 will not work on the Nemco 1512 or 1514 models.
Nemco 55550-6 Wedger 6 Nem Item # 55550-6 Features: -Wedger 6 Nem. -Allows you to slice vegetables and fruits into wedges for increased yield. -Made from stainless steel. -Blade has a 20 degree angle and can cut fruits and vegetables up to 1/2". -Maximum capacity is 15lbs of fruit or vegetable. Dimensions: Overall Height – Top to Bottom: -1” Overall Width – Side to Side: -4 1/4" Overall Depth – Front to Back: -19 1/2" Grid Opening Width – Top to Bottom:...
The Wedger-6 Nemco part# 55550-6 is a high quality, durable replacement part for Nemco’s Wedger-6 Series. It is resharpened and rewelded after every 90 degrees of use, ensuring that the cleanliness of your cuts remain consistent and the quality does not diminish over time. The Wedger-6 Nemco part# 55550-6 features 3 blades on each side with a 60 degree blade angle. It comes in its own plastic carrying case with a knife sharpener, so you can make sure it stays sharp at all times.
The Nemco Wedger-6 is a fast, economical method of producing uniform potato wedges for your restaurant or buffet. The Nemco Wedger-6 is suitable for use with the Nemco Easy Chopper II, Nemco Half Moon Chopper, Nemco French Fry Cutter and Nemco French Fry Cutters. The Wedger-6 cutting plate features two reversible blades, which are easily changed from the top of the unit without having to remove the food carriage or disassemble the unit. A single blade can be used for left or right hand use.
WEDGE-6 is a cast aluminum wedge-shaped blade with an aluminum blade protector that fits NEMCO #5 and #55 slicers. Wedge-6 will fit the WEDGE-5, WEDGE-5M and Wedger 6M Nemco models.
WEDGER- 6 NEM for Nemco - Part# 55550-6
The Nemco 55550-6 is a WEDGER- 6 for Nemco. The 55550-6 is a Wedger for Gourmet Sandwich Makers.