WESTERN ENTERPRISES 312-M1-540-P REG. M1 SERIES PRESET 50PSI

REG. M1 SERIES PRESET 50PSI

The REG. M1 SERIES is an economical, straight-handled sprayer for medium-pressure applications. The REG. M1 SERIES has a heavy-duty metal spring for increased output pressure at a slight additional weight. The handle can be mounted on either the left or right side of the sprayer; on the right with accessories or on the left for convenient spraying from either side of work surface. BEARING TYPE: Ball, HANDLE TYPE: Straight, PSI: 50, GPM: 2.8

The WESTERN ENTERPRISES 312-M1-540-P REG M1 SERIES PRESET GAS SPRING VALVE, is a two stage gas spring set of three locking pins for use on commercial or industrial applications. It can be used as a cam lock.

The M1 Series of preset regulators are designed for use in the refrigeration, liquefied gas, and natural gas sectors of industry. These preset valves feature an all brass body with a steam-adjusted, chrome plated metal stem (except for Model M1-450 and M1-500 which have a stainless steel stem). The elastomeric diaphragm is bonded to the body to ensure sealing integrity. Many models available with either stem or seat connection. CGA 661 connection: Male thread. PSI: 50

The M1 Series Preset line of air regulators with flow-adjustable and non-adjustable models. The regulator must be installed in the gas supply line between the outlet of the LP-Gas cylinder and the torch orifice. This series is designed for use with any regulated torch, in the oxyacetylene mode of operation, using a single highly efficient mixing chamber.

The M1 Series has a built-in preset pressure regulator that provides a constant output stream rate. The regulator is preset for 50 psi, which makes the device compatible with most common paint products.

The M1 series Regulators offer a compact, lightweight design that is perfect for laboratory or medical applications where space is limited. With the infinitely adjustable lever, the regulator can be adjusted to any pressure from 0-50 psi. The stability of the regulator can be confirmed with the dual scale pressure gauge on the front of the valve. The body of the valve is constructed in a black chrome and die cast zinc with all stainless steel internals for long life.

Reg. M1 Corp. 141 West St. Bridgeton, NJ 08302 (888) 456-7837 Fax (888) 456-7802