Bell & Gossett M75065 CAPAC 40 MFD 240V ROUND CAPAC 40 MFD 240V ROUND

CAPAC 40 MFD 240V ROUND

The CAPAC 40 MFD 240V ROUND is engineered to meet all of these tasks. The CAPAC 40 MFD 240V ROUND has an efficient capacitor start motor that delivers up to 35% greater motor efficiency than conventional AC induction motors for reduced energy consumption, reduced noise and lower operating costs. It also includes built-in cycling capability, allowing it to cycle on when system pressure drops below setting pressure and then restart the compressor at a higher pressure.

The CAPAC 40 MFD 240V ROUND Low Pressure Cast Iron Replaceable Cartridge Pump is designed to meet the stringent demands of LEED specifications. It can be used in low pressure applications, such as booster pump systems, hot water circulating systems, water treatment systems, irrigation systems and sprinkler systems. Its exclusive radial double seal allows low operating pressures, for long life and improved efficiency. It is cast iron with replaceable cartridge. The unique design provides optimum energy efficiency while providing continuous trouble free operation.

The CAPAC 40 MFD 240V ROUND water capacitor is a 40 mfd, 120 volt, three-wire capacitor that can be used for refrigeration and air conditioning equipment. The capacitor features a voltage rating of 120 volts, capacitor class of round, full frame, solid or split ring terminal mount, and non flame arrestor.

The Bell & Gossett M75065 Capac 40 Mfd 240v Round is a boiler circulation pump, nonreversing. It features 1 speed, 3/4 NPT, casing diameter outside 11 3/4 inches, casing diameter 13 5/8 inches, overall diameter 13 5/8 inches, overall height 15 3/4 inches. The Bell & Gossett Capac 40 Mfd 240v Round has a maximum temperature of 140 degrees Fahrenheit.

The CAPAC 40 240V round has a built in ground fault interrupt that disables power to hot wire safely if ground fault occurs. This charging capacitor can be used with multiple panels, battery banks, regulators, and inverters.

The M75065 round MFD capacitor features a 60HZ, 75MFD/440VAC, 400 cycle at 25°C, 5.0% linear tolerance. The main features of the capacitor are non-vented aluminum construction, solid carbon strip between the electrodes, green epoxy elastomer blend dielectric, Class Y encapsulation for enhanced reliability, and tin plated leads.

When choosing a capacitor for your application, you'll want to consider the Voltage, Capacitor Size, and Frequency. A capacitor's MFD or MFV is used to indicate how much total energy it can store in Farads of capacitance, which includes both voltage and frequency. The Capacitor Voltage of the motor is the voltage that must be present at the start of full load of the motor; it cannot exceed this value.-For continuous duty applications, use of an 80% of full load capacitor will provide adequate motor run protection. Use of a larger capacitor will allow operation at lower speeds (higher torque). For

Powerful, quiet, and instant hot water for commercial installations. This instant hot water heater provides 40 amps of 240-volt output making it well suited to high demand applications in locations such as schools, light industrial buildings, apartments, restaurants & motels, hospitals, churches & places of worship, office buildings, etc.

Jump-start your plumbing projects with this air conditioning/refrigeration condenser. It comes complete with a copper tube, a condenser head and a mounting strap. The round design is ideal for high performance air conditioning and refrigeration applications where close spacing of components is necessary. This unit can be used to connect hot water heaters and pool heaters to an existing circuit of the same capacity or your local building codes may require a larger furnace or a circuit breaker.

Product arrived on time with no shipping damage. Product was properly protected. But the person that sold it to you should have told you that the plug end was not straight. It can be bent into shape to make it fit into a standard 15A 120V wall outlet, but why should you have to bend anything? I had to use 2 of these units, and both had this problem.

Stainless Steel with a White Round Face

The M-Series Water Treatment System is a state-of-the-art, single tank system of Metals filtration media designed to remove up to 98% of iron, sediment and hydrogen sulphide from water. A durable stainless steel casing houses the process media and is of high impact design to withstand years of service. The system also features a patented AquaRust® coating to inhibit corrosion on the steel components. This feature gives this systems superior longevity thus saving you time & money in long term ownership costs.