York 025-20069-000 Expansion Valve

Expansion Valve

York 025-20069-000 Expansion Valve . This replacement expansion valve is designed to be installed into a YORK Centaur or York HVAC unit in the case that your original value fails.

The Expansion Valve is a mechanical device used to divert and control the flow of compressed air and other gases. It requires complete installation and the use of solenoid valves must be avoided as it can lead to severe damage or possible injury. The expansion valve may also be referred to as an exhaust pressure control valve (EPCV).

York's 025-20069 Expansion Valve features an easy-to-read dial for setting the desired amount of cooling, to be used with York commercial water coolers.

Expansion valves function to reduce the pressure in the hot water pipe system while increasing the flow of hot water entering the plumbing system, while regulating flow rate through the expansion tank. An expansion valve is needed in order to utilize the full potential of the Energy Recovery Ventilation (ERV) Unit, Energy Recovery Units (heat exchangers) increase indoor air quality by heating or cooling indoor air through heat recovery.

Our YORK® mechanical expansion valves are designed specifically for individual heating and cooling systems. They allow the water heater to automatically adjust, as hot water demand changes, and prevent damage to the heater and your home due to excessive temperature and pressure fluctuations.

The YORK 025-20069-000 1.75 Inch expansion valve will work with your air conditioner to control the temperature of your home from turning lower than it should. The expansion valve has a low pressure cut out to prevent the system from becoming over pressurized. Also, there is a pressure safety switch that will turn off power to your compressor if a safety problem occurs. The York Expansion Valve can be used in Wood, Pellet, Gas and Oil furnaces. It replaces YORK part numbers 025-20069-001 and 025-20069-002.

The YORK 025-20069-000 expansion valve is designed for use with air conditioners. It features a 1/4" MNPT outlet. It has a 10-3/8" frame size and a 5/8" neck diameter. This unit measures 16" overall length and comes with a max flow of 30psi/212bar. The handle color is black, the body material is brass plated, and the neck material is brass plated steel.

Summer months can get extremely hot, leading to high energy bills due to air conditioning use. Air-conditioning companies recommend adding an expansion valve to the central air conditioning system in the home when cooling capacity falls short. The York 025-20069-000 Expansion Valve allows room air to enter through the system process, thereby lowering the coolant temperature, maximizing energy efficiency and reducing energy costs during periods of extreme weather.

Whether you're looking to increase the capacity of your York natural gas tankless water heater or create a more efficient heating system, the 025-20069-000 expansion valve is a great option that will meet your needs. This easy-to-install unit features a flow restrictor that reduces the flow of water going to your showerhead, so it doesn't have to work as hard to warm the water up.

The York 025-20069-000 Propane Gas Expansion Valve is designed to maintain the correct gas to air ratio in the heating system, without this component your boiler will not function correctly.

York has designed this expansion valve for use with gas refrigeration equipment. The valve will actuate under pressure to act as the control device within the control loop for these types of operating conditions.

This item is brand new. It is in original packaging with all accessories included.