York 025-33202-000 Thermistor

Thermistor

This thermistor is used with York furnaces. It is for both intermittent pilot models and one-shot pilot models, but it cannot be used with the G16 model. The thermistor mounts into the pilot assembly using a small amount of sealant or grease.

This thermistor has a NTC type resistance range of 10K ohms at 25C to 2.2M ohms at 200C.

The York 025-33202-000 Thermistor is a common heating element. It's primary usage is for furnaces, but it is also found as a heat source on space heaters, water heaters, as well as on the blower assembly of some ranges and ovens. The thermistor is a negative temperature coefficient device used as a temperature sensor in heating systems. Because of the potential danger of electrical shock from the high temperatures employed, it is an industry standard to use a device such as this to sense the temperature and prevent the possibility of accidental burn injuries.

A thermistor is a resistor whose resistance varies with temperature, they are used as temperature sensors, since their inherent properties cause them to output a varying voltage that may be easily measured. A popular implementation of this is the negative temperature coefficient (NTC) thermistor, also known as a PTC thermistor. This device's resistance decreases with increasing temperature, due to positive nickel-tungsten nucleation sites within the solid state ceramic composition.

The YK Service Solutions YK710 Thermistor is an electronic device that's used with outside air dampers to control exhaust air temperature. A thermistor is analogous to a variable resistor whose resistance changes with temperature. It is used as the sensing element in temperature controllers.

The York 025-33202-000 is a thermistor used to detect temperature and change it into an electrical signal. The thermistor creates a voltage, which is directly proportional to the temperature.

The YS Code Thermistor is used for applications that require package integrity. This thermistor offers package options in a unique leadless package, with resistance range from 10 Ohms to 2,000 Ohms. The YS-253300-2N3-1 is screened at 25 Degrees Celsius to 150 Degrees Celsius.

The 6V Beta 95A series thermistors are designed for use in regulating temperature in refrigeration systems operating at temperatures up to 110ºF (43ºC), but they can be used in heating systems.

The york 025-33202-000 is a thermistor that is used in a variety of applications. This part can be used in oil fryers, boats and other water craft, in wood stoves and furnaces, in heat exchangers in nozzles in various locations throughout a building. This part comes with the CE mark on the product, which certifies that the thermostat meets both German and European electrical safety standards.

A thermistor is a device used to measure the temperature. They are used in situations where resistance to heat flow or electrical current are being controlled by the presence of heat. A thermistor made of ceramic material possesses both positive temperature co-efficient and negative temperature co-efficient which results in almost zero change in resistance with change in temperature.

The York 025-33202-000 thermistor is a replacement part for York furnaces, and is used to measure the temperature in the furnace. If the thermistor goes bad, you probably will not be able to adjust your thermostat.