York 025-36115-001 Air Proving Switch Air Proving Switch

Air Proving Switch

Air Proving Switch 025-36115-001

With its many uses, extra long 10-foot wire, and compact design that tucks away neatly into the housing unit, this Air Proving Switch will prove invaluable on your maintenance list. It has a heavy duty toggle switch for "Off-On" with an on-off safety lock, separate control switch to help control pressure settings, On--Off--Reset knob with safety on/off lever on the side of unit for monitoring operation on load equipment. Fast action release slide on output connection which is designed for 1/4 inch steel pipe test connections.

Help your customers get more out of their heating and cooling season with this Air Proving Switch . It tests the air density in the air delivery system of a furnace or air conditioner. The large metal wing nut is easy to adjust, allowing you to ensure that your equipment is running at peak efficiency. This switch senses the presence of air or gas flow for fast, accurate readings.

Designed for larger homes and commercial applications, the 025-36115-001 Air Proving Switch is ideal for installation in a new or existing home. This air proving switch allows you to adjust and monitor the temperature and dehumidify current in the ductwork at different points within your home.

Home appliances and other things which operate with a voltage of 110, 220 or 100-240 volts may require a test switch. They must be tested on a regular basis to ensure that they will work properly when needed. The 025-36115-001 Air Proving Switch from York can be used as a test switch for many of those things. It is suitable for the specific purpose as listed below.

The 025-36115-001 Air Proving Switch is a 2 position switch used to short the prop proving circuit with an external source of power. The die cast die steel enclosure is resistant to oils, solvents and most common vapors and liquids.

Air proving switch (APW) for aircraft engines. The APW provides access to the engine bleed air system for ground testing of the pneumatic system and engine starting air requirements. An integral release diaphragm, or externally applied pressure, activates a toggle latch mechanism which releases an operating lever and closes a redundant valve.

The York 025-36115-001 air proving switch - This air proving switch is designed to switch from one circuit to another to provide a closed control circuit for normal operation and a grounded control circuit when a fault is present. The York 025-36115-001 air proving switch is used with split phase electric heating systems.

This switch is used in the Air Proving Mode of operation on the following York Air Conditioning Units:

Initiating air proving by breaking a connection between a line and a pressure gauge, and supplying air to a pressure-reducing valve.

A metal enclosure that must meet certain tests for high pressure, vacuum and other tests.

Good deal to get just one product.