York 031-02418-001 Stall Detector Board

Stall Detector Board

York 031-02418-001 Stall Detector Board, (1) for use with 19300, York-, Minisplit Heat Pump or MiniSplit AC Units

York's Stall Detector Board is ideal for use in livestock facilities to help prevent animals from being left unattended in stalls. This stall detector board will sound a three-minute alarm if animals are left unattended in their stalls.

The Stall Detector Board, 031-02418-001, is used as a safety device in conjunction with all-electric door operators to detect stall, or non-movement of doors. The stall detector detects the condition when a door stalls, which occurs when obstructed by an object or becomes misaligned due to improper installation. It will not allow the door operator to start again until the stall condition is removed.

The Stall Detector Board is for use with the York Air Conditioning unit. Electrical testing and repair of heating, cooling, and refrigeration systems requires training beyond that normally expected of a technician. For example, many if not most problems are associated with improper wiring.

Add a stall detector board to your York 031-02418-002 Stall Door Kit. The stall detector board is easy to install and allows the door(s) to stay open until a door is fully open. Connect up to three stall doors (up to 30 amps) with this 10 ft., 18/3 cordset.

The stall detector board is mounted on the wall near the last stall in a bathroom where the plumbing connections enter the wall. When a whirlpool or shower is turned on, a disk inside the stall detector board is activated. The disk activates a relay to sound an alarm if the water supply stops flowing to the system.

Lavatory Stall Detectors are designed to be placed on the floor of bathroom stalls and nullify the audible chime when a stall is occupied. Easy to install, stall detector boards each come with two wire leads that allow for quick hook up to any water-based standard mechanical toilets or electric toilets utilizing 12 volt transformers.

The stall detector is easy to install and features a visible red light that blinks when the stall is occupied. The stall detector will fit most existing partitions or panels.

Electrical stall sensor board is used to detect the electrical stall condition of the motor when it has reached rated voltage. It is applied in the circuit of e-bikes, motor driven scooters, and other electric vehicles.

Simply attach the sensor to the stall door and connect with a standard 2-wire doorbell transformer.

When you want to make sure your horse's stall door is closed and latched properly, a stall door lock will come in handy. This quick-release stall door lock from York has a self-contained battery that operates up to 6 months before replacement is needed. The lock comes with an automatic reset feature and optional audible warning tone so you know when stalls are open or if a battery is low.