York 37102012001 SENSOR KIT PRV POS

SENSOR KIT PRV POS

This York 37102012001 SENSOR KIT PRV POS is a genuine replacement part from York. This sensor kit is designed to monitor the power supply for the unit and will signal the condenser when to start and stop making ice. It is compatible with most brand of evaporators...

The York YKDRY-104CYPU-AA SENSOR KIT PRV POS from Ultra-Heat is a replacement part that is a part of a bigger product, hence the description above. This particular product can't be used as a stand-alone offering.

The York Sense-A-Rama Sensor Ready PRV/Pos system allows for easy installation of Sensors. This system has a Durable polycarbonate enclosure with top hinged access door. An integrated power supply accepts 120 Vac, 208 Vac or 24 Vac. With an easy to program set point of 70???F +/- 2???, this ready-to-install package offers convenience and reliability.

This kit contains the following parts to repair the leak into the PRV valve: O-ring

This PRV pressure relief valve is a replacement for the original.

York's Prv Pneumatic Tank delivers a built in tank pressure, connected to a three-way indicator that provides high, medium, and low pressure readings. This kit features a 3/4" Standard Port, 2P500 Flow Control Valve, 1/4" NPT Sender/Transmitter Housing, and 1/4" NPT Mounting Bracket.

York Water Heaters 2001 and newer that do not have a pressure valve or a check valve, will need to purchase this kit. This kit is the replacement pressure purge valve and O-Ring and seats and stem. Replacement procedure: 1 Lift top cover of water heater and remove burner box cover using 10 mm wrench. 2 Remove old PRV, O-ring and Seat using Groove Joint Pliers. 3 Install new O-Ring , Seat and new PRV, assemble as shown on diagram above. 4 Replace Burner box cover 5 Replace Gas Valve as required