York S1-024-24116-000 24V SPDT Relay Control 24V SPDT Relay Control

24V SPDT Relay Control

The S1-024-24116-000 24V SPDT Relay Control is an electronic module which is used to control 24 Volt low current devices . To be able to connect the relay control to one of the timers switch for example the S6-030-12210-600.

The York S1-024-24116-000 24V SPDT Relay Control is a solid state control device used to switch off or on a separate circuit application. The device works on the Serial Peripheral Interface protocol which can transfer data at high speed to a microcontroller or other system with little effort.

The Z-Wave line operated 24V SPDT Relay Control by Lutron is the ideal solution for convenient control of lighting loads in residential and commercial applications. This single pole, double throw relay provides switching control of an appliance or device from a Z-Wave enabled controller or wall switch.

Specifications: 2-24V SPDT Relay Controls 4-Terminal

Continuous Control Loop 24VDC SPDT Relay

The YS1 SPDT relay module can be used with 24VDC power supply. When the control signal turns ON, the relay provides 24V direct output and 3 to 24V DC output.

The S1 Series SPDT Relay has a nominal voltage of 24VDC at 10 mA. A SPDT relay is an electromechanical switch. It is a three-terminal device used for electrically controlling one or more electrical circuits. The coil of the SPDT relay is energized by a control circuit, which causes the movable switch to change state and assume either one of two positions.