VENTER MOTOR 1/60HP 3000RPM
VENTER MOTOR 1/60HP 3000RPM, Fuel type: Electric
Designed for high-speed commercial equipment, York's VENTER Motor 1/60 HP is able to withstand constant heavy duty operation. Reliable and durable, the motor is built with a compact size for easy installation.
The York S1-024-36056-000 is a 1/60 HP, 230/460V, 2.75 Frame size motor that operates at 3000 RPM. It has a continuous duty rating and 60 cont. HP. This hot water VENTER motor has Totally enclosed fan cooled (TEFC) construction, single phase construction, 30 frame, aluminum rotor, shaded pole, centerline shaft design, thermally protected (K type) 110 degree C thermostat and 15 kW thermal overload protection. Quick connect terminals are provided on the windings for ease of wiring. All models are totally enclosed fans cooled
The VENTER 1/60HP motor is a high torque, low speed heavy duty motor designed for long runs of rope. This requires a specific voltage & frequency to operate at its optimal performance. The bearing housing is tightly sealed to the motor shaft which limits the possibility of debris entering the bearings, prolonging bearing life. The VENTER 1/60HP has a no maintenance permanent lubricated motor that provides quiet operation over its long life.
SIMOVERT motors 1/60HP 3000RPM - 1 PHASE 230v & 460v
York 1/60HP VENTER MOTOR.
Set your ventilation system to a whole new level with the Venter Motor. This powerful motor operates a wide range of vents, draft diverters and smoke scrubbers, and is intended for use where a fan motor is not available. Offered with a mounting bracket to provide convenient installation.