York S1-025-47244-000 M/R SPST ROLLOUT SWITCH M/R SPST ROLLOUT SWITCH

M/R SPST ROLLOUT SWITCH

The M/R SPST ROLLOUT SWITCH has a standard mounting design that is suitable for industrial and military environments. It has a cost-effective construction and disposable contact construction. This industrial and military grade switch features a removable rocker and SPDT roller lever actuator. The actuator enables the switch to be remotely activated with minimal installation time and field wiring. The switch features an attractive white enclosure and snap-action contacts that provide a positive locking action for reliable operation.

Can-Pak Products announces the M/R SPST ROLLOUT SWITCH for use in industrial, commercial, medical and military applications.

The YORK M/R Switch includes an attractive housing cast in polycarbonate resin, a watertight rotary switch, and a "pop-up" actuator arm. The actuator arm is attached to the molded wall by two screws that are fully counter-bored into the housing. . This M/R SPST ROLLOUT SWITCH is UL damp location listed, CSA certified, and is available with 12VAC or 24VDC coils.

The York® 35mm M/R SPST ROLLOUT SWITCH features an externally visible dual flash contact types for indicating switch position. This allows the operator to verify that the switch is in its correct position even when the operator is not in the same location or when light levels are low. This switch can be used in many electrical equipment applications requiring high cycle life with almost instantaneous actuation.

With pickup truck manufacturers continuing to shrink the inside dimensions of their trucks, creating less space on either side of the bed for bed rails, more and more pickup truck owners are using Rollout Ramps. The York M/R SPST Rollout Switch is designed to replace the existing safety switches that can be damaged or rendered useless on some trucks by the ramp hardware.

The YORK SPST ROLLOUT SWITCH has a compact vertical size and a 25 amp capacity. York switches are UL and CSA listed, and it is designed for two-wire applications. Its triple break system is ideal for hazardous locations.

The York M/R foot operated rollout switches are designed for applications where no self-contained automatic resetting features are desired. The products are designed with the confidence of the industry's premier switch manufacturer, providing years of trouble free use in light-, medium-, and heavy-duty industries, including all types of vehicles.