York S1-026-34089-000 "Accumulator tank 3/4""id 49oz" "Accumulator tank 3/4""id 49oz"

"Accumulator tank 3/4""id 49oz"

The York S1-026-34089-000 "Accumulator tank 3/4""id 49oz" "Accumulator tank 3/4""id 49oz" is a refined system that combines the convenience of an air distribution manifold with the energy efficiency of a direct expanding accumulator, resulting in reduced cost and increased reliability.

The York S1-026-34089-000 accumulator tank 3/4""id 49oz has an accumulator tank mounted on a bracket with a removable cap and a check valve with a cross handle for removal, mounted on a welded steel base, pressure tested at 2,400 psi gage with a 12-point replacement gasket. These accumulator tanks are ideal for customers who wish to equip their boat with their own brand of water pump.

The York S1-026-34090-000 accumulator tank 3/4""id 49oz from Air Products is an encapsulated, horizontal, steel vessel designed to store compressed air at a temperature of approximately 130 degrees Fahrenheit. It has a rated working pressure of 3000 psi and a rated vacuum pressure of -35 psig.

The S1-026-34089-000 is a 49 oz. accumulator tank that is often used in cryogenic applications. Measurements are 3/4"" in diameter by 2-3/4"" tall. The gauge glass in the stainless steel tank measures 1-3/16"" in diameter by 1-7/8"" tall. Coordinates with the rest of the S1 series manifold system, available separately.

Our 1/4" ID, 0.49 oz (14.6 grams) accumulator tank with wing nut fitting is perfect for any air-powered tool like nailers or staplers. With its impressive durability, this accumulator tank can withstand plenty of drops and dings.

The York Accumulator Tank is a 49 Oz. tank that is compatible with YRT-3 and YRT-4 evaporative humidifier models. The Accumulator tank increases humidity by collecting warm, moist air from the home and releasing it back into the home as cooler, dryer air. The Accumulator tank has a built-in scale that helps reduce the frequency of service intervals for your humidifier unit.

There perfect for the b-baller seeking massive amounts of free-flowing air. S1 Accumulator Tanks can be used to increase the effectiveness and deliver higher CFMs than any other brand of tanks. Available in either 1 or 3/4" I.D.

The Accumulator Tank is made of low-pressure/vacuum generator coils intended for safe, high-quality hot water at your fingertips. With an anti-corrosion, UV resistant design and a stainless steel reservoir, this tank can be installed in any room and installed with ease. A shut off valve and reservoir cap allow for quick and easy servicing.

Made of sturdy polyethylene. Stands 2 1/2"" tall to easily mix two chemicals together, without spills. Protection from chemicals, rust and corrosion. It is simply designed for basic chemical mixing.

The S1-026-34089-000 is part of the A Series, which of pressure tested aluminum tanks that are used in air conditioning units.

Aqualizer and AquaForce Pumps. (S1-026-34089-000)

The York Tankless Water Heater series is part of our Green savings program. Each tankless water heater operates at up to 97 percent efficiency, which saves enough energy to power the lights in more than 16 homes for a year! The replacement parts are also available on-line if needed, after the product is delivered.