York S1-029-20423-042 #42 Natural Gas Burner Orifice #42 Natural Gas Burner Ori

#42 Natural Gas Burner Orifice

This gas burner gas orifice is designed for use with natural gas and is located directly under the natural gas burner. When the gas valve is opened, this orifice allows the mixture of air and gas to ignite and form a flame. This orifice comes complete with hex nuts, support bracket and bolt.

The original 100% stainless steel Burner Orifice is suitable for use with Super-Heat models. It is completely interchangeable with the factory orifice; simply screw it directly into the gas control valve.

The standard orifice for a high output natural gas burner, the

The S series orifice is designed to enhance the ignition performance of gas burners that are not obtaining the proper pilot ignition. The orifice may also be installed for flame delivery adjustment. Other benefits include: 1/8? NCF (Natural Circumference Ferrule), 2,000 hour life expectancy, 0.032? ID (Inside Diameter), 9/64? OD (Outside Diameter).

A natural gas orifices are used for high temperature applications, such as electric induction cooking, where the controls are set at high levels above the rated temperature of the burner. The orifice controls flame spread, turbulence, and burner noise.

Take your cooking to new heights with this Orifled burner. The 1/4" gas line fitting will clamp onto your existing orifice, for ease of replacement. The orifice itself is made of brass for durability, and so you can control the amount of gas flow.

York S1-029-20423-042