York S1-324-36073-307 1/2hp ECM Blower Motor

1/2hp ECM Blower Motor

The York CX102 1/2hp ECM Blower Motor will work on most furnaces.

York S1-324-36073-307 1/2hp ECM Blower Motors are designed to replace factory installed blower motors in York manufactured home furnaces, hydronic heaters, boilers, and water heaters. York S369-3R01-36073-307 1/2hp ECM Blower Motors are also used as replacement blower motor for other manufacturers' products.

The York Blower Motor is a new aftermarket, high quality 1/2hp ECM blower motor. The ECM series blowers are electromagnetic type motors for through the duct installations. The drive is delivered by an external exciter which is field matched to the airframe of the motor. There are no internal slip rings or brushes to burnout or wear out.

The S1-324-36073-307 is a 1/2hp ECM blower motor for use with York brand air handlers and heat pumps.

York 1/2HP ECM Blower Motor - S1-324-36073-307 The following article goes into detail describing the feature. It also mentions that the product is quality tested.

Benchmark blower motor for York equipment is a 1/2 horsepower, three-speed, direct drive motor. Utilizes an ECM switch assembly and is wired with a four-lead quick connect plug for installation and replacement of blower motors in field. Designed to run 5,500 CFM on low speed and 7,500 CFM on high speed.

This 1/2 hp, 1725 RPM, 115/208-230V ECM motor is for commercial blowers with a 2.4 frame size. It has a harmonic damper and sealed ball bearing construction that withstands the toughest conditions and provides years of maintenance-free operation.

The York ECM blower motor provides permanent-magnet, reversible refrigeration compressor motor protection. It protects the blower motor from thermal overload, brush degradation and the effects of power anomalies. A frequency-based current signature for your application is stored within the ECM to compensate for transient power disturbances and ensure long life

Features include: 1/2 HP, 115 volts, ECM motor, Ball bearing construction, Long life - 50,000 hours, Class B insulation to prevent short-cycling, CSA certified for Canada

3/4 HP Blower motor with Energy Consuming Motor technology for added power, efficiency and longer life. Energy Efficient Motor Technology (EEMT) conserves energy while maximizing air flow. Why is this important? Energy efficient motors are up to 2X more efficient than conventional motors.

The 36073307 is a newly remanufactured motor with a full 90 day York Factory Warranty. The ECM motors are designed to operate on 115V AC power. It has an efficient permanent magnet rotor that improves operating sound, power, and product life. They are multiposition mountable with accessory Mounting Bracket SFY311740, which are optional accessories.

The S1-324-36073-307 is indoor unit fan blower motor for York Heat Pumps.