CALEFFI 115117 24V Zone Valve Actuator without mic 24V Zone Valve Actuator without mic

24V Zone Valve Actuator without mic

A zone valve is a one-piece solenoid valve with an actuator, which is used for heating control in commercial, residential, or industrial applications. The Features of the Product are : 115117 24V Zone Valve Actuator without mic

The Caleffi 115117 24V Zone Valve Actuator without mic is a device used to control a zone of a sprinkler system. This device comes in both electric and water-filled versions. The electric version does not have a moving part, so it is more accurate and responsive than the water filled version. These devices are used for Zones 0 to 16. It can be installed either vertically or horizontally, depending on your preference.

The Caleffi 115117 24V Zone Valve Actuator without mic is designed to close/open zone valves when used with thermostatic mixing valves, outside air dampers or grilles, control circuits or any other valve for heating or cooling applications.

Caleffi 115117 24V Zone Valve Actuator without mic. This product is manufactured in Italy by Caleffi.

CALORAIR 115117 24V Zone Valve Actuator without mic. Contains the valve only, the controller must be ordered separately. The electronic control unit must have a multi-stage heating curve with on/off, defrosting/warm-up stages, plus central heating control according to the customer's specification.

CALEFFI Zone Valve Actuator without mic. Corresponds to following manufactures' products: Idra, MeccAlta, Riello, Therme-Vaillant, Buderus

These zone valve actuators fit into a 24v frame and connect to a 115V heating cable. Pressure switches and timers are recommended to operate these actuators: CALEFFI: 81009, 81009-1, 81019 and 81019-1.

Zone valve actuator Caleffi 115117 with a compact design and a big, easy to read LCD display. This zone valve allows you to regulate the flow of water in a zone easily and efficiently. It's the perfect companion for domestic systems with integrated zone valves. Valve equipped with a single setting, two compressor and three outputs for electrically controlled zone valves. Note that the displayed menu is different from that on model 115121. In addition , In order to use it with device CALEFFI Elettropompe NCS, you need to install kit

Caleffi Zone Valve Axial Actuators are designed for under floor heating systems where zoning is required or where the system is not tethered to a common manifold. The actuator is available in both 90o and 180o configurations. The installation of the actuator does not require any new wiring, thus easing installation costs. The actuator also has an easy access terminal box which allows connection to the electrical supply.

Designed for use on established commercial and industrial water heating systems, providing a high quality solution for controlling zone aquatherm valves via a pneumatic air actuator network.

Delivers programmable control over individual heating zones. This is a replacement part and can not be used with other similar actuators. The model number requires the remote portion to be specified separately.