HONEYWELL ZD12X16TZ ZD12X16TZ 24V AUTOMATIC RECTANGULAR DAMPER 12

24V AUTOMATIC RECTANGULAR DAMPER 12

THE 24V AUTOMATIC RECTANGULAR DAMPER 12 FROM HONEYWELL IS THE PERFECT SOLUTION FOR THE CONTROLLING AND REGULATING OF HEAT IN SMALL TO MEDIUM-SIZED COMMERCIAL BUILDINGS AT THE LOWEST COST POSSIBLE. THIS MODEL IS MADE OF STEEL AND PLASTIC, OFFERS A TRULY AUTOMATIC OPERATION THAT PRODUCES DUAL EFFECTS: 1) GRADUATED, STRICT COMPLIANCE WITH COMFORTABLE CONDITIONS FOR WORKERS

Open your door to the world of controlling climate with the HONEYWELL Zd12x16tZ ZD12X16TZ 24V automatic rectangular damper 12. This damper is built to fit small spaces, and packed with features such as the powerful G4A motor controller, i-programmability capability, and convenient wall-mounting kit for added security. Welcome to the HONEYWELL family.

The Z-Wave Honeywell ZD12X16TZ Remote Dampers are powered by Z-Wave and is used in combination with a 24V valve to allow the damper to be controlled via a wireless switch or gateway system. The device is wall mountable.

The Z-Wave Plus™ HONEYWELL RECTANGULAR MICRO DAMPERS, powered by Luup, are designed for use with HONEYWELL Z-Wave smart home automation hubs to offer you the ability to control ventilation and temperature in an unobtrusive and convenient way, from your Z-Wave hub or mobile device. Use the thermostat mode to set the damper's temperature when you go out of town, or to regulate rooms that are rarely used. The dimming mode is useful for when you want to lower the lights in a room or area without affecting the overall temperature. In

Distributes conditioned attic air throughout the home for improved comfort. Damper can be installed in multiple locations along the ridge, typically in the soffit, to meet HERS rating. Automatically closes when temperature drops outside of thermostat setpoint. Meets current and future climate zone requirements.

The ZD12X16TZ Series is a fully modulating damper ideal for heating, ventilating and air conditioning systems for controlled fresh air delivery to the user environment. This device is a non-reversing, single-speed (0.5 CFM) electronic damper with a built-in photoelectric smoke detector and provides one simple set point input signal for operation. The sensing area can be triggered by motion, building pressure, temperature or humidity sensing devices for applications such as ventilation control of hazardous or explosive atmospheres e.g. laboratories, computer rooms and clean rooms.

The Honeywell ZD12X16TZ is available with a service heater option that allows you to operate through blower door types of speeds (0.5 to 2) or variable speed controls, and most important this damper features a power chain with a 6' cord and plug for stand-alone installation of the damper in the case it is not connected to a Honeywell Protech Air Raintrol Dampers Controller #MMTS.