Honeywell 316673 ZD24X12TZ 24L X 12H Parallel 2pos24v S/R

24V AUTOMATIC RECTANGULAR DAMPER 24

The Z-Wave 24V Automated Rectangular Damper is one of the most powerful Z-Wave devices offered by openHAB. Not only can it be used as a regular automated damper, but it can also be used as an automated relay to switch any other load consuming up to 1.5A. In addition, this device includes a status LED on the front side as well as on the backside. It's guaranteed to fit all 24 or 25mm frame metal cabinets and windows with side depths between 74 and 176mm...

When you need a replacement damper for your manual, patented, 24V automatic dampers, you can trust the Z-Wave Honeywell 316673 to do the job. It's high product quality and high reliability are what set it apart from so many other dampers.

Our 17 Series 24V Automated Dampers are designed for ventilation and environmental air control. With a variety of interchangeable actuator styles, damper sizes, and air outlets there is a model to fit any application. The dampers are produced utilizing stainless steel construction for environments where cleanliness is of paramount concern and to meet the requirements of food service plants. A snap-action check valve placed upstream on all models creates a positive closed position which prevents back flow of air or leakage from the system when not in use.

The ZD24X12TZ is a 24V automatic, parallel 2-position damper. The damper can be configured for either air supply or return air and can be supplied either with or without the motorized portion of the damper assembly.

The 316673 24-Volt Z-Wave® enabled fully automatic damper can be used with a wide range of heating systems including some electric baseboard, panel and convector units. The damper will maintain the user selected temperature on the remote thermostat or automation system and open and close automatically to control room temperature. This is compatible with most 24V heating systems with ~1" round or rectangular duct openings. The 316673 Parallel 2-position model has two damp

Ideal for forcing air into duct systems. It features an 8 in. round air-inlet ring, and a 4 1/3 in. x 12H rectangular outlet ring ideal for mounting to duct work or a diffuser. This damper is Round, self-storing.

Installation and service made easier with a pre-wired control box constructed of heavy cardboard, with pre-punched knockout patterns for easy access. A rear access cable allows these dampers to be installed directly into the sidewall of a duct, leaving no exposed wiring or clamps.