Zoeller 10-4014 Zoeller Z CNTL ENABLED A-PAK W MECH SNSR

Zoeller Z CNTL ENABLED A-PAK W MECH SNSR

Zoeller 10-4014 Zoeller Z CNTL ENABLED A-PAK W MECH SNSR is not exclusively made to be used at home. It can also be used in certain industries, which are the chemical and the pharmaceuticals industry for its pump water pump. Since there are a number of products that use this pump through its intrinsic properties, there is no doubt that it can be considered as a commodity as well as a heavy duty equipment.

The Zoeller Z CNTL ENABLED A-PAK W MECH SNSR has a storage capacity of 180 gallons with four distinct zones to better contain different types of waste water. It has an energy saving feature that makes it more economical than ever before. This item even comes with a limited one year warranty for added peace of mind.

The Zoeller Z CNTL ENABLED A-PAK W MECH SNSR is an indoor thermostat-enabled 15 amp air-powered sump pump that provides a continuous recycling of water from one pump cell to the next, ensuring water always remains in the cell with the highest water level.

The Zoeller 10-4014 ZENITH Series 1/2 HP Sump Pump is one of the most popular sump pumps due to its ability to perform in both vertical and horizontal discharge applications. The ZENITH pumps are manufactured with a durable cast iron pump and Stainless Steel hardware. The Zoeller Z CNTL ENABLED A-PAK W MECH SNSR features an On / Off switch that allows you to easily control when the pump runs, providing unrivaled convenience. This...

The Zoeller remote controlled, continuous run centrifugal sump pump is the ideal solution for basement flooding. This powerful pump will efficiently handle water outflow, with a maximum discharge of 785-gallons per minute. The Zoeller Z CNTL ENABLED A-PAK W MECH SNSR pump includes a 3-wire control box and 50 ft. cord assembly as well as the necessary hardware to connect the pump to your discharge system.

The Zoeller Z CNTL ENABLED A-PAK is compatible with all brands of variable speed pumps, and includes everything needed to upgrade your pump in a few simple steps.

The Zoeller Zcontrol Enabled A-Pak W Mechanical Pressure Switch operates to control the circulation of water in the system, while protecting the pump motor from overheating. The pressure switch will activate the pump when the water rises above a certain point and cut off once it lowers. This switch can be used in both pumps as a manual mode allowing you to turn on and off the water manually. The wire for this switch is 18".