DC POWER CONTACTOR 12V CONTINUOUS D
The WHITE-RODGERS 99845W 7.3 KW (13 Amp) DC POWER CONTACTOR 12V CONTINUOUS DUTY AND 100 AMP INRUSH WhiteRodgers heat pump contactor features a normally open, field adjustable, static pressure compensated design with an easy access terminal block. This contactor is intended for natural gas and propane applications and will de-energize when the resistance between its terminals exceeds 14 Ohms. It provides continuous duty
WHITE-RODGERS 99845 WHITE-RODGERS 99845 Isolated DC Power Contactor Rated: Continuous Duty with Inrush 400 Amps, 500 AIC, 1000 AC and 100 Amp RC @ 250 Vac Input Nominal Voltage: 12VDC Certifications: UL/cUL Listed Input Power: MAX 100 Watts Torque Value: 22 in lbs Environment: Indoor Air Free (IAC) Minimum
The 99845 is a Normally-Open (NO), DC power contactor that can be used as an interface between a DC power source and AC load relays, DC Control Relays, DC Overload protection and DC starters. This contactor is rated for continuous duty and has an inrush current of 400A at 100VAC. The chassis is made of plated steel with zinc die cast housing. A mounting bracket is provided along with 8-32 threads on the bottom to accept stand
99845 This power contactor is designed for use with the White-Rodgers Interface Module. It opens the circuit when power is present and closes the circuit in the absence of power. The 99845 is thermostatically controlled to allow contactor coil warm up and cool down, as required. It will not operate if an internal voltage lock out has occurred. Contact ratings are 50 amps a 240 VAC/125 VDC, 100 amps at 12/24 VAC/DC continuous duty
24V, DC Input Voltage Isolated Contact, 0.063 sec Typical Response Time, 27 Amps Power Ratings (Pulse duty cycle not recommended for DC operation), ISOLATED NO / NC CONTACT INPUT CURRENT TOLERANCE, 300% rated continuous duty. For use in general control applications where an input signal is required such as interlocks including fans, motors, heaters, safety controls and in other environments where the need might be switched of or on from time to
Be notified of supply problems before they occur. The alarm can be directly wired to the building's fire-alarm system or set up as a stand alone unit. Audible alarms, standard on all White-Rodgers 200 Series controllers, indicate why the power has been interrupted. Durable construction. UL and cUL listed
The B-200 and BR-1 Relays can be used on control panels such as the p293. The contacts are rated for 5 amps at 120 volts AC/DC and the coil is rated for 100 amps of DC power.
Free Shipping
In stock
