WHITE-RODGERS 113244 White Rodgers Solenoid, SPDT, 36 VDC Isolated Coil, Continuous Duty

Solenoid, SPDT, 36 VDC Isolated Coi

WHITE-RODGERS 113244 Solenoid, SPDT, 36 VDC Isolated Coi

White-Rodgers Solenoid, SPDT, 36 VDC Isolated Coil, Continuous Duty. the most trusted name in heating and air conditioning parts and equipment

The 113244 White-Rodger SPDT (single pole, double throw) solenoid has a continuous service rating of 2.7 kW at 208/230 VAC, 50/60 Hz. This solenoid is isolated coil and features an IP66 degree of protection from solid objects greater than 50 microns. This model also comes with a 2-1/8" solenoid bore, 20" wire leads 2 terminal and stainless steel mounting bracket with screw terminal.

The 113244 Isolated Solenoid from White-Rodgers operates on DC voltages between 20 and 36 volts and requires an operating voltage of 24 to 28 volts for standard actuation. This solenoid is packaged with a mounting bracket but does not include a leadwires or fuse. The line voltage coils used in this product are rated for continuous duty and have a minimum breaking capacity of 1/8 amp @ 120 VAC.

This Solenoid/Motion Sensor provides the added convenience of allowing your system to turn off the power to your pool or spa pump at night. It works with virtually any pump and comes complete with a standard 5-pin dip switch, user manual, wiring diagram and instructions for mounting on either a flat surface or wall using the two mounting holes in the top of the unit. This is an ATSCO exclusive product - not available anywhere else!

The SR113244 is a 24-Volt DC, Solenoid Valve which has been tested to ANSI/BHMA Standards. The SR113244 cycles with 36-volts DC and includes a "Normal Coil" and "Normally Closed Coil" to determine proper operation.

Isolates the neutral wire. Gas or liquid pressure actuates the Solenoid to connect or separate circuits; designed for low voltage activation and control systems.