Honeywell 1886 - 1 SPDT AUX SWITCH FOR MOD IV MOTORS

1 SPDT AUX SWITCH FOR MOD IV MOTORS

This auxiliary switch connects to the #9 terminal of any Honeywell Mod IV garage door motor (ALRM series). The switch has a white finish.

The Honeywell 1886 is for use with the Honeywell Mod IV 1.5 amp DC motor. Switch operates smoothly and provides long life operation.

The 1 SPDT Auxiliary Switch operates independently of the Control Head (must maintain contact with line conductor) and manually turns the modulating motor on or off. This switch is most commonly used as the remote control, allowing the PLC to monitor...

To install this switch into a Mod IV panel, the existing Aux. switch must be removed. This can best be accomplished by cutting the wires from the terminals to the switch. The wiring harness for the new Honeywell 1886 Aux. Switch has wire connectors that will reconnect the wires to the new Aux. switch.

The Honeywell 1886 is a 1 SPDT Aux Switch used for control of Water Heaters, Stoves and Boilers by the use of a programmable Nest differential relay control board.

See more. Do more. Honeywell automation’s new Mod IV’s Range of Variable Speed Motors are designed to meet the needs of varying applications, small to big. Featuring up to 15.7 Hp, air and electrical starting and a wide voltage range makes these direct-drive (non-cordless) motors a perfect fit for your home automation projects.

The Honeywell 1886 is an Auxiliary Switch for use with the Honeywell L156, L156PSU, L166 and L166PSU controllers. This switch can be used to provide additional control over receptacle outlets mounted in a single gang electrical box on the control panels of some automation devices including motor controllers, fan controllers, lighting controllers and appliance controllers.