SCHLAGE 24666356 THICK DOOR KIT FOR BE375 1.875 to 2.25 IN

Schlage 24666356 BE375 Thick Door Kit 1-7/8" - 2-1/4"

The Schlage 24666356 thin door conversion is a perfect solution for replacing existing doors that are too thick to accommodate contemporary deadbolts. It can also be used to replace builder-grade doors and ensure enhanced security, thereby providing greater peace of mind. This DIY-friendly entry door conversion kit is designed to fit in 1-7/8" - 2-1/4" thick deadbolt locksets and deadlatch locksets.

This Schlage Beaded Edge 1-7/8 in. - 2-1/4 in. 50 mm to 64 mm Solid Door Thickness Extension Kit E12 Fit deadbolts and electronic door locks (DE) in the Schlage cylinder family. It replaces factory original strike face on a Schlage residential jam or surface bolt lock of any style with a thickness from 1-7/8 in. measuring face hole diameter, to 1.875 in. You can use this extension kit with the BE375 series as long as you stay within the spacing requirement of 11-3/16 in., as well as

Schlage thick door kits fill the gap between a 1-7/8" to 2-1/4" diameter door frame, while maintaining a tight mortised nose into the jamb. Each kit comes with four high strength steel screws and three brass butt hinges for connecting the lock to the door.

The Schlage BE375 series of door hardware includes all of the necessary hardware to finish the doors in a number of ways. These approaches are; Standard Door Prehung, Thick Door Slam Stop, and Paintable/Stainable options. The Schlage BE375 series allows for multiple finishes to be applied; wood, wood paintable, steel and steel paintable. It should be noted that unless it is an option or requirements are specified, all parts here are for the 1-7/8" door width.

Thick Door Lock, Featuring Schlage's high quality build and design, this easy-to-install kit works with all BE375 Series deadbolts. Available in three finishes to match your door's style—Brushed Nickel, Satin Nickel or Venetian Bronze—it accommodates 1 3/8" to 2 3/4" doors and lifts up to standard 3" doors.

Schlage Thick Door Conversion Kit - Complete with Strike Plate for Schlage Locks with 1-7/8" - 2-1/4" backset.

Add convenience and value to your home with this Schlage door package that fits your Thick Door. The easy-installation kit helps convert a standard door to a thick door opening. The kit contains two 3" backset, full mortise door knobs; a 1" solid squareback latch; one 1" deadbolt; one 2-1/4" x 4-1/8" strike plate with screws; and two steel backed adjusting inserts. This kit is ideal for wider doors or if you don't want your door knob visible on the glass.