RHEEM 173747 /Protech - Transformer - /Ruud/Protech - A comp

120V-PRI 24V-SEC 40VA TRNSFRM

The RHEEM 173747/Protech Transformer is a 120V-PRI 24V-SEC. It has 40VA and the following features: PRI SECTION – NEMA 1, GENERAL PURPOSE OUTLET, AMPERE RATING 15, VOLTAGE 115. SWITCHING CAPACITY: 3 KILOWATTS SEC SECTION – SPLIT RANGE CONTROL FOR OVEN OR CONVECTION HEATING MODES, AMPERE RATING 7.5, VOLTAGE 240. STOCKED ITEMS WILL REACH THE CUSTOMER WITHIN 24 HOURS

The Protech - Transformer - /RUUD/Protech - A comp is a 120V-primary, 24V-secondary 40VA transformer that is used to convert 120V single phase power into 24V secondary power.

This Indoor, 120 volt, PRI/SECONDARY RHEEM transformer has a 40VA rating. It has a primary output and second (look at the bottom picture for labeling). It is rated at 240 volts / 24 volt approximate. The wattage (how much it can handle) per coil is 8000 watts. For example (if you have 2 x air conds etc). If you use it as one single device and run it on say 120 volts then it will typically handle 2000 watts. + or - some due to the peak load of the devices on the transformer itself.

Rheem/Protech, a comp air compressor protech / protector transformer is a 1-phase 17.5 kVA transformer with a 16 KVA continuous and 40 VA (120 V primary voltage) secondary voltage

Compact, industrial strength transformer designed for use with a variety of Rheem and Ruud gas furnaces. 1200VA/600W 9"H x 5-1/8"D x 9"W

Master Pack's new power source unit combines the features of a transformer and an AVR into one modular package for applications requiring both functions. This power source contains a secondary voltage transformer with output selectable from 90 to 132 VACRMS. A primary input power line fuse protects the transformer. The unit contains a solid state switching circuit that can be used out of the box or programmable for custom system protection requirements.

The RHEEM 173747/Protech is a vertical thermal-magnetic transformer that provides 240/120V single phase service.