CALEFFI 308116 1/8 MINICAL AUTOMATIC AIR VENT - BRASS BODY 150PSI MAX WORKING PRESSURE

1/8" MINICAL AUTOMATIC AIR VENT - B

This MINICAL AUTOMATIC AIR VENT is for use on your gas log system. The 1/8" vent allows you to adjust the air flow and therefore the amount of BTUs or heat your appliance uses to fire up the logs to desired heat setting. The MINICAL AUTOMATIC AIR VENT will maximize the efficiency of your appliance, decrease the start-up time, and maximize your gas consumption. This vent is brass plated with a 150 psi maximum working pressure.

CALEFFI 308116 1/8 MINICAL AUTOMATIC AIR VENT - BRASS BODY 150PSI MAX WORKING PRESSURE

Free air circulation in every corner of your home is now possible with 1/8" Minical automatic air vent. This ventilation system eliminates stagnant air, and triggers itself automatically when the heat situation becomes critical without the need for any human intervention. The vent blows out a constant stream of fresh air, and is highly energy saving in terms of energy costs.

The Caleffi 308116 1/8" Minical Automatic Air Vent is used with heating and cooling systems with burners used with natural gas, propane, LPG or fuel oil. This automatic air vent helps control the combustion process of fireplaces or stoves by balancing the air intake to fuel ratio and preventing backdrafting and dangerous carbon monoxide from seeping into a home.

The Open-bulb, 1/8 inch Minical Automatic Air Vent is suitable for home and commercial applications including positive displacement systems where air pressure must be controlled at all times. It operates automatically, requires no adjustment, and should be checked periodically for proper operation.

This 1/8" Brass Body 150 PSI Max Working Pressure Industrial Air Vent features a superior-quality, machine honed brass inflator with maximum durability for long-lasting performance. This air vent is designed as a perfect replacement part. It features a maximum working pressure of 150 PSI and includes a drain hole, check valve, and is compression fittings for quick and easy assembly.

The automatic air vent, applied in the smaller section of the metal duct, using a pressure spring system but with fixed point turns, is suitable for the supply air circuit or the return air circuit of the pre-heater and heaters, or their combination.