WHITE-RODGERS 99945 Emerson Hot Surface Ignitor, 120V, Silicon Carbide .

HOT SURFACE IGNITOR WITH 5-1/2" LEA

WHITE-RODGERS 99945 Emerson Hot Surface Ignitor, 120V, Silicon Carbide TYPE -- HOT SURFACE IGNITOR WITH 5-1/2" LEAD WIRE, CONTROLLED SELF-LIGHTING UNIT

The 99945 Emerson hot surface ignitor with 5-1/2" leads is designed for use with a 120 volt, gas appliance. The unit is constructed with silicon carbide and an impulse seal to reduce arcing. The unit is designed to be used on the small appliances featured in the electrical division of the electrical segment of Emerson Climate Technologies.

WHITE-RODGERS HOT SURFACE IGNITOR WITH LEAD

For indoor gas hot water boilers and heat exchangers, this White-Rodgers 199945 silicon carbide incandescent Hot Surface Ignitor is designed for a 5-1/2 in. x 3/4 in. diameter hole and up to 600 ft. lbs. of torque on the flat part of the screwdriver slot used for installing in place of Emerson #L7011 or Raypak #25900659. This ignitor provides better temperature sensing than a thermocouple with a

WHITE-RODGERS 99945 Emerson Hot Surface Ignitor, 120V,

The 99945 Emerson Hot Surface Ignitor, 120V, Silicon Carbide is a replacement component for the N990-10324-00 hot surface ignitor. It features a durable glass filled nylon knob and an extended shaft with 6' of wire. Use this ignitor to replace malfunctioning parts on your furnace.

WHITE-RODGERS #99945 Emerson Hot Surface Ignitor, 120V, Silicon Carbide... Product Features: 120 VAC/DC2500W Maximum rating Silicon carbide block resists arcing and burnout Model 99945 includes hex mounting nut; Models 99946 and 99947 has wire leads (compatible with standard contactor) ...