WHITE-RODGERS 99953 Silicon Nitride Hot Surface Ignitor , 2 Terminal Amp Receptacle With .093 Female Socket

OEM REPLACEMENT NITRIDE HOT SURFACE

The 99953 Silicon Nitride Hot Surface Ignitor is designed as a replacement for the Robertshaw 1CR9 and 4284-20 series components. Each replaceable ignitor has a 2 terminal AMP receptacle with .093 female socket. Order part number 99954 for the wire lead kit (1/2 inch leads), part number 99955 for the extension kit (1-1/2 inch leads) and part number 99956 for the 12 foot lead kit.

This White-Rodgers 99953 Silicon Nitride Hot Surface Ignitor is a two terminal amp receptacle with a .093 female socket, and will work with most major brands of gas or LP-gas appliances.

The 99953 Silicon Nitride Hot Surface Ignitor is a two terminal, 1000-watt replacement part for use with all White-Rodgers time delay relay panels or thermostats. When paired with the appropriate time delay relay panel or thermostat, this Silicon-Nitride surface model can be used as a standard Bake-Out surface ignitor on gas units, or as a Hot Surface ignitor when using an electric heat source. This surface model is most commonly used to replace White-Rodgers part numbers 99950 and 99951.

The original and most trusted in home heating, cooling and ventilation. Model 99953 Silicon Nitride Hot Surface Ignitor, replaces many manufacturers' ignitors of varying phase numbers.

WHITE-RODGERS 99953 Silicon Nitride Hot Surface Ignitor is original equipment device (OEM) made from ductile cast iron for excellent corrosion resistance. The device is designed to be used with 2 terminal Amp receptacles.

The 99953 Hot Surface Ignitor is an OEM replacement part. It comes with a .093 female connector and are used for connection and ignition of gas appliances, such as burners, ovens, valves, furnaces, boilers, etc.

The 999 series nichrome hot surface ignitor is a single banded ceramic device. The ignitor is cylindrically shaped with a socket connection on the top and bottom. This device is used in a variety of appliances with heaters or thermoelectric cooler. The internal conductor of the ignitor is surrounded by nichrome wire and housed in a ceramic tube which provides the radiant heat source. This product comes standard with an .093 female terminal receptacle, also referred to as an amp receptacle.